End of Service Products

  • 1.  What's the Extremeware and XOS command equivalent of cisco's show int | i proto|Last in

    Posted 11-15-2017 18:22
    I need to know how many days has a port been unused via console/telnet, in extremeware (and XOS) with epicenter SW you are able to track but I want to know is there is a CLI equivalent to CISCO show int | i proto|Last in

    Thanks


  • 2.  RE: What's the Extremeware and XOS command equivalent of cisco's show int | i proto|Last in

    Posted 11-15-2017 18:27
    I think this will get what you want:

    X440G2-12t-10G4.18 # show port info detail | include Port:|Link\sState:|Link\sUps:|Link\sDowns: Port: 1
    Link State: Active, 1Gbps, full-duplex
    Link Ups: 1 Last: Thu Aug 03 16:59:29 2017
    Link Downs: 0 Last: --
    Port: 2
    Link State: Ready
    Link Ups: 0 Last: --
    Link Downs: 0 Last: --[/code]


  • 3.  RE: What's the Extremeware and XOS command equivalent of cisco's show int | i proto|Last in

    Posted 11-15-2017 18:28
    Show port info detail will show you the last link up but resets when the stack reboots.


  • 4.  RE: What's the Extremeware and XOS command equivalent of cisco's show int | i proto|Last in

    Posted 11-15-2017 18:30
    In EXOS, you can see the last up/down dates at the top of the
    code:
    show port X info detail
    command:
    # show port 12 info det
    Port: 12
    Virtual-router: VR-Default
    Type: UTP
    Random Early drop: Unsupported
    Admin state: Enabled with auto-speed sensing auto-duplex
    Link State: Ready
    Link Ups: 2 Last: Mon Oct 30 05:32:11 2017
    Link Downs: 2 Last: Tue Nov 14 10:26:57 2017
    ....[/code]
    EDIT: Brandon's answer above is better than mine.


  • 5.  RE: What's the Extremeware and XOS command equivalent of cisco's show int | i proto|Last in

    Posted 11-15-2017 18:40
    Thanks for your replies... and do you know if there's a way to know on Extremeware 7.8e.4.1 (one of our legacy switches.. )?

    Gracias


  • 6.  RE: What's the Extremeware and XOS command equivalent of cisco's show int | i proto|Last in

    Posted 11-15-2017 18:40
    It looks like the same command on eware gives a counter, but not timestamps. There may be another, but there aren't any powered on in the labs to test. Here's the example from the command reference guide:
    # show ports 2:6 info detail

    Port 2:6:
    Type: UTP
    Diagnostic: passed
    Random Early Drop: Disabled
    Admin state: Enabled, with auto-duplex auto-speed sensing
    Link state: Ready
    Link counter: Up 0 time(s), Down 0 times(s)
    VLAN cfg:
    Default [Internal Tag=0001,Mac-Limit:Cfg=No-limit,LRN=0,BlkHole=0]
    ....[/code]