End of Service Products

 View Only
  • 1.  How Capture Packets in Extreme x400 (Extremeware) Switch...

    Posted 02-28-2017 04:07
    We are capturing packets in our EXOS Switches using "debug packet caputre". In our network we are having ExtremeWare Switches(x400) also. It is not showing the debug option. How to capture packets in ExtremeWare Switches(x400)?

    Thanks.


  • 2.  RE: How Capture Packets in Extreme x400 (Extremeware) Switch...

    Posted 02-28-2017 04:42
    What information you are trying to collect from debug output? Provide us the exact switch model and software version.


  • 3.  RE: How Capture Packets in Extreme x400 (Extremeware) Switch...

    Posted 02-28-2017 05:42
    Sir,

    We are trying to detect number of mDNS packets received by the switch. In our x440 Model switches, we ran the "debug packet capture on" and "debug packet capture off" to capture packets. After that , We will filter the mDNS packets from the captured file using Wireshark.

    Please check the below image for Switch model and software version.



    Thanks.


  • 4.  RE: How Capture Packets in Extreme x400 (Extremeware) Switch...

    Posted 02-28-2017 06:06
    Hello, Thavamani Shanmugam!

    As I know packet capture work from EXOS 15.4 and hier.
    I don't beleive that ExtremeWare have this functional.

    But as workaround you can use Mirror to some packet analizer.
    With ACL you can filter only necessary traffic for Mirror.

    Thank you!


  • 5.  RE: How Capture Packets in Extreme x400 (Extremeware) Switch...

    Posted 02-28-2017 07:06
    This functionality is not available in the legacy ExtremeWare products.