ExtremeCloud IQ

  • 1.  Error Aerohive AP150W cannot speedtest above 200mb

    Posted 11-01-2021 09:51
    Hello,
    I am having problems with the Aerohive AP150W.
    I have configured the 80mhz channel so that it can receive the highest bandwidth.
    But when speedtest, the bandwidth is always limited to less than 200mb. My network connection is 300mb.
    I used Aerohive AP250, it went up to full 300mb, but when I switched to Aerohive AP150W, it only went up to 190mb. Even though I was very close the wifi was only a meter away.


  • 2.  RE: Error Aerohive AP150W cannot speedtest above 200mb

    Posted 24 days ago
    Hello, sorry for the slow reply here, I was out of the office last week. When you set the channel width to 80MHz, you're increasing the throughput from the client to the AP, but not from the AP out to your network or from your network out to the internet. Just wanted to clarify that real quick. For the rest of your issue, could you send me tech data so I can check a few things for you? This guide reviews how to get tech data. 

    For speed issues, the first things we typically check have to do with Radio Frequency interference. If you'd like to look at the tech data yourself to troubleshoot this, we have an in-depth RF troubleshooting article that can be found here. If you'd like to email me the tech data so I can take a look and let you know what I find, please feel free to send the tech data file to me directly at community@extremenetworks.com.