ExtremeCloud IQ- Site Engine & Extreme Management Center

 View Only
  • 1.  Netsight SNMP Traps Failed

    Posted 10-26-2015 07:43
    we have Netsight and XOS switches. we are having a problem regarding the traps in netsight specially in One View. we can successfully add trap receiver in Netsight Console but in One View the Trap Status is "Set Failed".
    what am I missing? thanks

    below are my screenshot:






  • 2.  RE: Netsight SNMP Traps Failed

    Posted 10-26-2015 08:45
    Hi Marlon,

    As per below article once we configured trap receiver in netsight it will be enabled on switch.

    https://gtacknowledge.extremenetworks.com/articles/How_To/Setting-up-Automatic-Alarm-Configuration-i...

    to make sure the switch configuration please check below steps.

    https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-add-a-trap-receiver

    Thanks,
    Suresh.B