ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

Web filtering in Vx9000

  • 1.  Web filtering in Vx9000

    Posted 12-21-2018 21:19
    Hi ,
    I have VX9000 , 30 remote locations working under this controller . Each locations have 4 to 30 APs working .These locations are hospitals . So i configured username for doctors,nurses & others . Then went to wireless client roles , Then created Application policy . but after the save these blocked websites are not be blocked . How can do this perfectly . I hope you hear soon .

    1. How can do web filtering under these users (Doctors , nurses etc ) .
    2. I want to block facebook & youtube for nurses . also some websites too .


  • 2.  RE: Web filtering in Vx9000

    Posted 12-22-2018 04:21
    Hi,
    You need to things to use application visibility and control - enable DPI and use application policy.

    #1. Enable DPI on the APs.
    profile anyap BRANCH
    dpi

    #2. create the application policy
    application-policy corp
    deny application youtube precedence 10
    deny application Facebook precedence 11

    #3. Assign the application policy in the WLAN
    wlan corp-wlan
    use application-policy corp

    You can assign it to the role also, but first make sure that the roles are properly assigned to the wireless clients.
    user-role staff
    use application-policy corp


  • 3.  RE: Web filtering in Vx9000

    Posted 12-22-2018 11:04
    Hi ,

    Thank you for your reply . i did as per you said . I assigned role for wireless clients too . But not be done .
    Now created doctor , nurse , others users with different password .

    Can you tell how can do the setup in application policy . Step by step . I tried so many times now but its not blocked .

    i hope you hear you soon ....


  • 4.  RE: Web filtering in Vx9000

    Posted 12-22-2018 14:16
    Ignore the roles first. Follow the 3 steps I mentioned It should disable the applications for the entire WLAN.
    That will also help you isolate whether the problem is with the role assignment or the AVC feature.


  • 5.  RE: Web filtering in Vx9000

    Posted 12-23-2018 05:43
    Should've asked first - which APs are you using ? For 80211ac APs, the feature is natively support on the APs. And can be used with locally bridged traffic.

    Secondly, you need to check if the user roles are appropriately being assigned. You can check that in the client statistics.


  • 6.  RE: Web filtering in Vx9000

    Posted 12-23-2018 08:55
    Hi , i am using AP7632i , All the aps adopted by VX9000 . all the remote locations are working perfectly under Controller . Now remanining these web filtering . DHCP is working in all locations , Just connected to internet router only . Assigned in auto provision policy as different IP range . Ex:192.168.1.1, 192.168.2.1,192.168.3.1 etc ..