ExtremeCloud IQ- Site Engine & Extreme Management Center

 View Only
  • 1.  How to create a custom fingerprint on purview?

    Posted 05-12-2015 10:20
    Hello all,

    Everyone knows how to creat a custom fingerprint on purview? or where I can find the sample to refer to?

    Thanks.

    Regards,
    Joy



  • 2.  RE: How to create a custom fingerprint on purview?

    Posted 05-12-2015 10:40
    Greetings Joy,
    This is discussed in some detail in the Purview Users Guide, starting about page 35.

    If you navigate to this link.
    https://extranet.extremenetworks.com/downloads/Pages/NMS.aspx

    Select Documentation -> Select Manuals and Release Notes -> Select Version 6.2 -> Select Purview Users Guide.
    Search for Custom Fingerprint Examples.

    Since it is pretty comprehensive, I won't try to guess what approach you would like to take. if you have a specific example you would like to cover, please post more detail on what your trying to capture. If it's secure information, then I would recommend opening up a case.



  • 3.  RE: How to create a custom fingerprint on purview?

    Posted 05-12-2015 12:17
    Hi Mike,

    Thanks for your feedbacks, and it's very useful for me.

    Regards,
    Joy



  • 4.  RE: How to create a custom fingerprint on purview?

    Posted 05-13-2015 01:15
    Hi Mike,

    In addition question, I would like to creat a fingerprint base on port and destination address, however I can not set multiple port number in a single fingerprint.

    e.g.

    port 21,449,8449
    destination address 192.168.1.1
    new custom fingerprint name "Internal-AS400"

    Do you know how to accomplish it or any other suggest?

    Thanks.

    Regards,
    Joy



  • 5.  RE: How to create a custom fingerprint on purview?

    Posted 05-14-2015 14:37
    You create 3 fingerprints with the same Name.
    E.G
    port 21
    destination address 192.168.1.1
    new custom fingerprint name "Internal-AS400"

    Port 449
    destination address 192.168.1.1
    new custom fingerprint name "Internal-AS400"

    8449
    port 21
    destination address 192.168.1.1
    new custom fingerprint name "Internal-AS400"

    Example Microsoft Lync Signature


    Top one is:


    Bottom one is:


    Either of these signatures will appear as Microsoft Lync when you generate reports for Lync.


  • 6.  RE: How to create a custom fingerprint on purview?

    Posted 05-15-2015 05:20
    Hello Frank,

    I got it, thanks a lot.

    Regards,
    Joy