ExtremeCloud IQ- Site Engine & Extreme Management Center

  • 1.  Finding Unused ports in NetSight

    Posted 12-07-2015 16:19
    I am trying to find the best way for a customer to locate ports that have been unused for an extended period, 30,60,90 days or more.

    We recently upgraded a customer to x460-g2 switches running 15.6.3.1
    We also installed NetSight 6.3.0.168

    The customer used to use Ridgeline's unused port report but that report does not appear to exist in NetSight. I started trying to see if there was a mib I could poll in a flexview but did not find anything there either.

    I am checking to see if I missed something or if someone has an alternative suggestion.



  • 2.  RE: Finding Unused ports in NetSight

    Posted 12-07-2015 16:46
    David,

    A similar post was made in regards to Unused Ports in NetSight recently. this should provide some insight and steps on how to configure:

    https://community.extremenetworks.com/extreme/topics/capacity-planning-ports-not-used-for-some-time

    We also have an article related to the topic as follows:

    https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-There-Any-Way-to-Determine-What-Ports-Are-...

    Hope this helps.


  • 3.  RE: Finding Unused ports in NetSight

    Posted 12-07-2015 18:00
    Thank you for the info, this should be very helpfull


  • 4.  RE: Finding Unused ports in NetSight

    Posted 03-30-2016 09:53
    This can now be done through capacity planning in Inventory Manager