ExtremeCloud IQ- Site Engine & Extreme Management Center

  • 1.  Using FlexView to aggregate Client information , how to select OIDs?

    Posted 10-05-2015 00:15
    Dear All

    I try to using FlexView to aggregate client's information (IP, MAC, and which port he come from) on swirch

    In switch like 430 , 440 it seem no problem, and OIDs I us like:


    but the same FlexView I using to show BD8806 's client information , the port will show 6XX 5XX:


    Does it need to using different OIDs to show real port on BD ? or it 's using same OIDs , but 645 means slots 6's port 45, it has slot 's mark before real port number?

    the second question is I also export this result to html and csv file .

    for html it lost mac address 's information


    for csv file it lost ReqID



    Does it need to change any options 's setting for showing full information when I export?

    My Netsight 's version was 6.2.0.221.

    Thank for everyone's help.

    Hunt.Liao
    2015/10/5 10:15 AM
    Tiwan


  • 2.  RE: Using FlexView to aggregate Client information , how to select OIDs?

    Posted 10-05-2015 01:04
    Hi Hunt,

    What all are the exos versions for X430, 440 and BD ?

    Thanks,
    Suresh.B


  • 3.  RE: Using FlexView to aggregate Client information , how to select OIDs?

    Posted 10-05-2015 02:18
    Dear suresh

    switch 's version 15.3
    BD 's version 12.4

    Did you mean it different OIDs between two version so I get wrong show ?

    Hunt.Liao
    2015/10/05 12:07 PM
    Taiwan



  • 4.  RE: Using FlexView to aggregate Client information , how to select OIDs?

    Posted 10-05-2015 12:13
    Question 2: - Export issues with FlexViews there were several bugs corrected in 6.3 related to Export showing consistently the same columns between CSV/HTML. Are you able to upgrade?