ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

C5210 and V2110 configuration backup via XMC.

  • 1.  C5210 and V2110 configuration backup via XMC.

    Posted 11-01-2018 12:07
    Hi,

    When I try to backup controllers configuration via XMC (ver. 8.1.5.22) I get the following error:

    Archive Save Management Center Archive: (192.168.10.122) Version Stamp: Nov 1, 2018 3:54:29 PM - Configuration Upload script is empty in file Enterasys Networks Wireless Controller - SCP :

    Is this a known problem?

    Regards,

    Rahman


  • 2.  RE: C5210 and V2110 configuration backup via XMC.

    Posted 11-01-2018 13:25
    Works for me so not a general problem.


  • 3.  RE: C5210 and V2110 configuration backup via XMC.

    Posted 11-01-2018 20:53
    Hello Rahman,

    did you check the settings for backup here (like transfer method...)





    Regards
    Stephan



  • 4.  RE: C5210 and V2110 configuration backup via XMC.

    Posted 11-03-2018 20:28
    Hello,

    Check out this article:

    https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-use-Inventory-Manager-to-backup-Ide...

    It's a little old, but you should be able to find the same option in Extreme Management Center --> Administration --> Options

    Let me know if this helps. I'll flag the article to be updated.

    Thanks
    -Ryan


  • 5.  RE: C5210 and V2110 configuration backup via XMC.

    Posted 11-04-2018 15:31
    I think the main question is did you upgrade XMC to that version and it was working before or is that a fresh install / you enabled archive the first time.


  • 6.  RE: C5210 and V2110 configuration backup via XMC.

    Posted 11-06-2018 10:46
    I get the same error with the settings you've posted in the screenshot.
    Change it to the below - that works for me....




  • 7.  RE: C5210 and V2110 configuration backup via XMC.

    Posted 11-06-2018 13:35
    Using these settings worked, thank you.


  • 8.  RE: C5210 and V2110 configuration backup via XMC.

    Posted 11-03-2018 20:28
    Hello Ryan,

    Yes, I checked the scp server password, it is OK. The error says script is empty but it is definitely not:




  • 9.  RE: C5210 and V2110 configuration backup via XMC.

    Posted 11-03-2018 20:28
    Hello Rahman,

    as I posted above you should use controlled by device type not Script.

    Best regards
    Stephan


  • 10.  RE: C5210 and V2110 configuration backup via XMC.

    Posted 11-03-2018 20:28
    Hello Stephan, There is no such option on my side.


  • 11.  RE: C5210 and V2110 configuration backup via XMC.

    Posted 11-04-2018 15:31
    No, I was not backing up them via XMC before. So I don't know it it were working with previous versions.