ExtremeCloud IQ- Site Engine & Extreme Management Center

  • 1.  Port Default Policy Role between Console and Policy Mngr is out-of-sync

    Posted 04-28-2014 17:00
    Why would Console and Policy Mngr differ when viewing the default port policy role that is being applied. Policy Mngr is showing in one case 20 ports with a specific role and Console only shows the role on 10 of those ports


  • 2.  RE: Port Default Policy Role between Console and Policy Mngr is out-of-sync

    Posted 05-01-2014 12:59
    are all those ports the same king (physical). In PM there is option to show also virtual ports = LAG.

    It should read the same OID from the mib, the data should be the same. Can you share the screenshot?

    Z.


  • 3.  RE: Port Default Policy Role between Console and Policy Mngr is out-of-sync

    Posted 05-01-2014 12:59
    Enterasys has confirmed that they are aware of this issue. I am running Netsight 5.1 and Netsight ver.6.1 is in the works with a fix. Screen shots are available in the case 01021283. Clarification... When viewing Netsight Console the "BasicPolicy" tab all the ports set to have a specific default role do not show the role, under the "Default Role" column. If I SSH to the switch (C3) and do a "show config policy" the "set policy port xx.x x is there for every port intended. The Netsight Policy Mngr. also shows all the intended ports for the role when I select a role and under the "ports" tab do a retrieve operation.