ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

learned mac address refer to group

  • 1.  learned mac address refer to group

    Posted 09-25-2018 07:04
    I have created a DEVICE GROUP with ITS INTERNAL only two port/pc so I STARTED the flexview "learned mac addresses" to know if the 2 pc are turned on but my view show nothing.




  • 2.  RE: learned mac address refer to group

    Posted 09-25-2018 09:43
    Did you click on the green play button icon in the upper right corner of this screen to start the query ?!


  • 3.  RE: learned mac address refer to group

    Posted 09-25-2018 10:11
    Yes absolutely!


  • 4.  RE: learned mac address refer to group

    Posted 09-25-2018 10:20
    Does it work if you run it on the whole switch isntead of an port group ?




  • 5.  RE: learned mac address refer to group

    Posted 09-25-2018 10:54
    YES ! but I need to show only the computers in that group
    otherwise what is the purpose of creating groups?


  • 6.  RE: learned mac address refer to group

    Posted 09-25-2018 10:54
    Calm down... I only wanted to make sure that it works in general before adding a device group.


  • 7.  RE: learned mac address refer to group

    Posted 09-25-2018 10:54
    Sorry 🙂 I am calm with you ..... I am less calm with Netsight !!


  • 8.  RE: learned mac address refer to group

    Posted 09-25-2018 10:54
    I get the same result..... I'd open a GTAC ticket as I'm not sure whether that will work with this flexview.


  • 9.  RE: learned mac address refer to group

    Posted 09-25-2018 10:54
    I'm afraid so :-(