ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

Capacity planning in Extreme Management Centre 8.0.3

  • 1.  Capacity planning in Extreme Management Centre 8.0.3

    Posted 11-03-2017 09:42
    I have looked extensively and there does not seem to be a way to provide a report based on used/un-used ports over any period of time that used to exist in Inventory Manager.

    There was youtube video posted about archives but it doesn't outline how to generate the reports.

    Can someone please enlighten me


  • 2.  RE: Capacity planning in Extreme Management Centre 8.0.3

    Posted 11-04-2017 12:12
    I would also like to know this!

    It appears that there used to be a Capacity Planning Report that you could run from Inventory Manager (the legacy Java console). But since that no longer exists - I cannot seem to find where this report ended up being moved to in the web interface?

    Here is a GTAC that describes the old functionality.


  • 3.  RE: Capacity planning in Extreme Management Centre 8.0.3

    Posted 01-23-2018 15:27
    It should be a pre-populated report under the Reports Tab.


  • 4.  RE: Capacity planning in Extreme Management Centre 8.0.3

    Posted 01-23-2018 15:27
    Thank you but I dont see a reports tab in the latest version




  • 5.  RE: Capacity planning in Extreme Management Centre 8.0.3

    Posted 01-23-2018 15:45
    Reporting functionality in the Extreme Management Center requires a license other than NMS-Base. If you don't see reports that indicates that you have an NMS-Base license and should contact sales to purchase an upgrade.



  • 6.  RE: Capacity planning in Extreme Management Centre 8.0.3

    Posted 01-23-2018 15:45
    Thanks for the update


  • 7.  RE: Capacity planning in Extreme Management Centre 8.0.3

    Posted 07-17-2019 19:34
    There is not a report that we have been able to find similar to the information that was presented in the Inventory Manager Report.


  • 8.  RE: Capacity planning in Extreme Management Centre 8.0.3

    Posted 07-18-2019 00:41
    It's not a report, but if you telnet/ssh into the switch, you can run the following command to get this info ...

    show port info detail | include Port:|Link\sState:|Link\sUps:|Link\sDowns


    It's been working pretty well for me. Credit due to whoever posted that on another thread. I just pasted it away in a text file and use it all the time.


  • 9.  RE: Capacity planning in Extreme Management Centre 8.0.3

    Posted 07-18-2019 11:43
    That might work fine, if we didn't need to provide the port to another group, plus we need it for over 100 devices. That was why the Inventory Manager Report was so useful.