ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

How to get a list of unused ports with Extreme Management Center ?

  • 1.  How to get a list of unused ports with Extreme Management Center ?

    Posted 09-10-2018 10:55
    Hi,

    I'm using Extreme Management Center version 8.1.4.40 with base licence. I'm looking for a way to get a listing of unused port for the last 1 year.
    I configured a daily task to collect "capacity planning" data but I'm stuck in the generation of a report like Ridgeline software did previously. And the "Capacity Planning" menu in Extreme Management Center's Dashborad just show a red disk indicating 100% not collected...

    For the moment, I try to check on demand, device per device, but I loose a lot of time and if the device has rebooted less than 1 year ago then I can't get a useful report.

    All my switches are running ExtremeXOS (from version 12.x to the last 22.x).

    Does anybody know a way to perfom this ?

    Regards,
    Romain M.


  • 2.  RE: How to get a list of unused ports with Extreme Management Center ?

    Posted 09-10-2018 11:55
    This command may be helpful - it gives a history of link up/ link down for a port.

    show port info detail | inc Port:|Link\sState:|Link\sUps:|Link\sDowns:


  • 3.  RE: How to get a list of unused ports with Extreme Management Center ?

    Posted 09-10-2018 12:28
    Thank you Jeff.
    That's the command I use. The problem with this command is that it gives the state since the last reboot of the device so you have to take care of the uptime of the device.

    I'm wondering if I should enable snmp traps for ports UP/DOWN so Extreme Management Center will have get this information to generate the Capacity Planning ?


  • 4.  RE: How to get a list of unused ports with Extreme Management Center ?

    Posted 09-10-2018 12:45
    I found this kind of lines in the server.log of my Extreme Management Center :
    168087468 2018-09-10T13:21:10UTC Inventory Server.4.Event r.mercier Inventory Server 172.31.0.229 Archive Save Archive Save Capacity Planning: (172.31.0.229) Version Stamp: Sep 10, 2018 3:15:00 PM - Warning - The ability to archive configuration files for this device has been disabled. :[/code]I checked the gtacknoledge site : https://gtacknowledge.extremenetworks.com/articles/Solution/Unable-to-archive-configuration-error-Th...

    On my server, this device is set on script for both firmware and configuration download MIB.
    This device is a stack of summit x440. And configuration archiving works well.

    Could this be a license restriction ?



  • 5.  RE: How to get a list of unused ports with Extreme Management Center ?

    Posted 09-10-2018 14:06
    In XMC, we have a couple of reports available for Port usage. These are all under FlexReports (for any given site). Please look at the following FlexReports : Device Ports Used or Port Capacity.


  • 6.  RE: How to get a list of unused ports with Extreme Management Center ?

    Posted 09-13-2018 11:17
    Thank you Sri.

    In this Q&A : https://gtacknowledge.extremenetworks.com/articles/Q_A/What-options-do-I-have-for-NetSight
    It's written that reports is include in NMS license, does FlexReport is a feature included in "Reports" ?
    My server is running a NMS-base license.

    Romain M.


  • 7.  RE: How to get a list of unused ports with Extreme Management Center ?

    Posted 09-21-2018 12:18
    Hi there,

    After some more research on the web, on the hub etc... I finally found a link to ExtremeNetwork's GitHub.
    https://github.com/extremenetworks

    There is a part dedicated to NetSight-Reports-View where I found many flexviews. Sorry Sri, all my searches about FlexReport brought me back to this thread.

    One FlexView is called "Port_Status_Time_with_alias" located here : https://github.com/extremenetworks/Netsight-Report-Views/tree/master/FlexView/Networking

    This flexview generate a list of all ports from a device, its current status and the elapsed time in this state. You can export data to a CSV file.
    The data don't seems to persist accros device's reboot.

    Romain M.


  • 8.  RE: How to get a list of unused ports with Extreme Management Center ?

    Posted 10-18-2019 10:36

    can anyone tell me where the flexviews for Port_Status_Time_with_alias is now on 8.3?