ExtremeCloud IQ- Site Engine & Extreme Management Center

  • 1.  Status Monitoring of Windows 2016 from XMC via SNMP - Firewall problem

    Posted 08-10-2018 08:35
    Hello,

    Did someone have a problem with status monitoring of Windows Server from XMC via SNMP?

    Problem occur with windows firewall on. Although I have enabled inbound and outbound rules for SNMP Service and SNMP Trap with firewall turned on there is no connection over SNMP.

    When I turn firewall off there is connection.

    Which rule I should enable to have connection over SNMP?

    (last screen shows fine connection over SNMP but with firewall turned off)




  • 2.  RE: Status Monitoring of Windows 2016 from XMC via SNMP - Firewall problem

    Posted 08-10-2018 09:07
    Hi Grzegorz,

    UDP ports 161, 162 has to be allowed, is that what those options "SNMP service" does?



  • 3.  RE: Status Monitoring of Windows 2016 from XMC via SNMP - Firewall problem

    Posted 08-10-2018 10:12
    "SNMP service" opens 161 and 162, as below:
    Inbound:


    outbound:




  • 4.  RE: Status Monitoring of Windows 2016 from XMC via SNMP - Firewall problem

    Posted 08-13-2018 23:24
    Hi Grzegorz, I guess maybe accessible IP scope isn't set. Did you set accessible IP scope for SNMP service?


  • 5.  RE: Status Monitoring of Windows 2016 from XMC via SNMP - Firewall problem

    Posted 08-13-2018 23:24
    Thank you 🙂 it helped. I didn’t see that SNMP rule accept (by default) connections only from "local network"