ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

bcmPseReceiveMessageString: timed out

  • 1.  bcmPseReceiveMessageString: timed out

    Posted 11-29-2017 17:47
    I would like to create an alarm in NetSight to monitor for future PoE failures which create these log messages.
    bcmPseReceiveMessageString: timed out

    Is there a trap I can turn on?


  • 2.  RE: bcmPseReceiveMessageString: timed out

    Posted 11-29-2017 18:36
    Hello David,

    The below article should help with achieving this:

    https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-send-an-SNMP-trap-based-on-a-log-me...

    Hope this helps!


  • 3.  RE: bcmPseReceiveMessageString: timed out

    Posted 11-30-2017 00:04
    These is another discussion in Hub. Maybe give you some hit.

    How send a SNMP Traps test to the Network Management?
    https://community.extremenetworks.com/extreme/topics/how-send-a-snmp-traps-test-to-the-network-manag...

    Hope it also helps.



  • 4.  RE: bcmPseReceiveMessageString: timed out

    Posted 12-11-2017 19:06
    I have now lowered the radio to 1x1.

    and that does not change any behaviour on the AP.

    CHANNEL : Current: 100 Configured: 100 Width: 20MHz
    TRANSMIT POWER : 17 dBm
    ANTENNA USAGE : 1x1

    transmit power is what AP is selecting it self.

    I have configured it for 30dBm EIRP.



  • 5.  RE: bcmPseReceiveMessageString: timed out

    Posted 12-19-2017 15:43
    I resolved the issue.

    I changed the order I pasted the commands in and that resulted in the line referencing the log filter erroring out. As a result it created a upm event for every log message that the switch saw.

    All good and working properly now.