ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

Map only rights in Oneview

  • 1.  Map only rights in Oneview

    Posted 12-21-2017 16:07
    My director has asked to view the maps in Oneview and I don't want to give him admin rights to do so. I have created a new group and went through the capabilities in the group but cannot figure it out. Any ideas?


  • 2.  RE: Map only rights in Oneview

    Posted 12-25-2017 03:37
    Hi

    First create a user group with list of capabilities which you want to allow for this user group then create a user account and map the user group.

    Please follow below steps to create user account in netsight.

    1. Choose the Administration tab
    2. Choose the Users tab
    3. Under Authorized Users click Add
    4. Type name into the User name pop up and select the Authorization group
    5. Click OK
    6. New user name appears in the Authorized Users list
    Thanks,
    Suresh.B



  • 3.  RE: Map only rights in Oneview

    Posted 12-25-2017 06:54

    Hi ,

    Please find the screen shorts for permission levels availables in Netsight also it has sub capabilities to select for user permission.



    Thanks,
    Suresh.B



  • 4.  RE: Map only rights in Oneview

    Posted 12-28-2017 09:00
    From a short test it looks like that you'd need to enable the following to get access to the maps...




  • 5.  RE: Map only rights in Oneview

    Posted 12-29-2017 23:50
    Hi,

    Please check and let us know if you have any further questions.

    Thanks,

    Suresh.B



  • 6.  RE: Map only rights in Oneview

    Posted 01-05-2018 19:47
    I was able to go through the checklist and select only the ones that gave him rights to the maps. Thanks for your help!