ExtremeCloud IQ- Site Engine & Extreme Management Center

 View Only
  • 1.  Login failed through SNMPv3 - not in life time

    Posted 06-08-2016 05:05
    Hallo,

    i have a Problem with this SNMP Messages.

    in Netsight: Login Failed Incorrect Community Name 10.10.10.11

    in the Switch log: Slot-1: Login failed through SNMPv3 - not in life time

    I have read in the community that i must add this command to switch config to solve it:

    configure snmp compatibility ip-fragmentation allow[/code] but the messeages comes still again.

    I use Ridgeline 3.1 and Netsight.

    Is there a possibility to turn off the Messages in Switch log and Netsight without upgrade Ridgeline to 4.x?

    Tanks

    Alex



  • 2.  RE: Login failed through SNMPv3 - not in life time

    Posted 06-08-2016 10:59
    Hi Alex,

    you can configure the syslog "DefaultFilter" like:

    configure log filter "DefaultFilter" add exclude events "SNMP.Master.AuthFail" match string "not in life time"

    Regards, Mikel



  • 3.  RE: Login failed through SNMPv3 - not in life time

    Posted 06-17-2016 06:31
    Hi,
    thanks a lot, this command works fine 🙂.
    I have no error messages in Netsight now.

    Regards,
    Alex



  • 4.  RE: Login failed through SNMPv3 - not in life time

    Posted 11-10-2016 06:26
    Hi guy,

    Just a question as pertaining to this case. Now, may I know by doing the default filter out this message; can we consider this as case being resolved?

    My customer apparently is running on Ridgeline 4 sp2 patch 2. Recently, the production switches did encountered the similar problem. Please advise whether there is a perm solution to resolve.

    Thank you andd regards,
    Dennis neo