ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

Customize Device List Tree in Console

  • 1.  Customize Device List Tree in Console

    Posted 02-22-2017 07:49
    Hello Everyone

    We are in the process of migrating from Ridgeline to Netsight and one request an engineer made was that the List of Devices in the DeviceTree should show the system Name of the Switch and the IP address instead of just the IP address.

    His remark was that in Ridgeline the Device-Name and the IP address of the device was shown in the device list. However in Netsight you can choose between: the IP Address or the SysName. You can have either but not both together (See Screenshot)

    Device List can show the sysName (or the default: ip address)



    I noticed that only the following options are available in the preferences



    Is there any way to customize this setting for example Use System Name and the IP Address. I noticed that whenever I change the setting the following file is modified:

    C:\Users\[u]\AppData\Roaming\NetSight\Console\Options\DataDisplayOptions.properties

    The property is either set to systemName or ip

    DataDisplayOptions.deviceDisplayNameFormat=systemName

    or

    DataDisplayOptions.deviceDisplayNameFormat=ip

    Is there an option like systemName + ip which would show both?

    Best Regards
    Chris



  • 2.  RE: Customize Device List Tree in Console

    Posted 02-22-2017 08:05
    Hi Chris,

    can you share the netsight version ?

    Thanks,
    Suresh.B


  • 3.  RE: Customize Device List Tree in Console

    Posted 02-22-2017 08:19
    We are running Netsight Version 7.0.9.4




  • 4.  RE: Customize Device List Tree in Console

    Posted 05-09-2017 09:51
    * BUMP *

    Any updates on this one ?