ExtremeCloud IQ- Site Engine & Extreme Management Center

 View Only
  • 1.  Can not update x440 firmware via Oneview

    Posted 10-13-2015 10:58
    Hi,

    I can not update X440 firmware vie Oneview(latest ver. 6.3). I just get "Error Downloding Firmware". I updated A4/B5/C5 deviced without any probem but X440 gives this error.

    Any hint on this problem? Thanks.


  • 2.  RE: Can not update x440 firmware via Oneview

    Posted 10-13-2015 11:08
    SNMP credentials have read/write permission on the x440?


  • 3.  RE: Can not update x440 firmware via Oneview

    Posted 10-13-2015 11:14
    Yes, I can run scripts like "CLI show configuration" via oneview. So no problem about snmp/cli credentials.


  • 4.  RE: Can not update x440 firmware via Oneview

    Posted 10-13-2015 11:46
    Hi Rahman,

    Are there any error messages in the switch log? Also, is the correct VR being specified when starting the download? For example, the switch has default VRs of VR-Mgmt and VR-Default.

    Regards
    Tony


  • 5.  RE: Can not update x440 firmware via Oneview

    Posted 10-14-2015 03:21
    Hi Tony,

    Yes, "show log" on x440 shows these errors:

    10/14/2015 08:19:16.00


  • 6.  RE: Can not update x440 firmware via Oneview

    Posted 10-14-2015 13:29
    Rahman,

    Just to confirm, is the EXOS image in the tftpboot/firmware/images directory or in the root/firmware/images directory?

    The file should be in the tftpboot/firmware/images directory.

    This may be related to the Knowledgebase article below:

    https://gtacknowledge.extremenetworks.com/articles/Solution/Inventory-Manager-is-having-an-issue-pus...

    Hope this helps
    Tony


  • 7.  RE: Can not update x440 firmware via Oneview

    Posted 10-15-2015 03:33
    Hi Tony,

    I generally transfer files to tftp folder via scp. It seems it was a permission problem. Now the device can download the files.

    Sorry for the noise, thanks.


  • 8.  RE: Can not update x440 firmware via Oneview

    Posted 10-15-2015 13:21
    Rahman, no problem, glad you were able to find the cause. Have a good day!