ExtremeCloud IQ- Site Engine & Extreme Management Center

  • 1.  Increase the SNMP poll interval timeout

    Posted 03-21-2017 13:38
    Hello, I have Extreme OneView running on the main site.
    From there, I have an unstable vpn to a remote site.
    Because of this, I receive a lot of SNMP alarms of the switches on the remote site.

    How can I increase the SNMP poll timeout value?
    For example, I would like that I get an alarm, if SNMP polling fails 10 times in a row the last 2 minutes.

    Many thanks and best regards,
    Yves


  • 2.  RE: Increase the SNMP poll interval timeout

    Posted 03-21-2017 16:47
    These are the steps below to increase the SNMP poll timeout values:

    1. Start NetSight Console
    2. Click Tools > Options > Suite Options > Status Poling
    3. Increase both SNMP Retries and Timeouts



  • 3.  RE: Increase the SNMP poll interval timeout

    Posted 04-06-2017 06:10
    Hello,

    SNMP settings are in. Click Tools > Options > Suite Options > Advanced SNMP Settings.
    The one you told me are ICMP setting. But thank you anyway :-)

    One more. Can I configure them specific by device?