ExtremeCloud IQ- Site Engine & Extreme Management Center

  • 1.  Netsight Map view

    Posted 06-05-2018 06:01
    Hi Guys,i have created a new map in netsight with Juniper MX 104 and Extreme Networks Switche.I have now the problem that I have no automatic links on my map, llpd protocoll is on.An another Problem is that I can not change the interface on my map from the router from access to interswitch.
    I am find nothing in the Internet about.....
    Who can help me


  • 2.  RE: Netsight Map view

    Posted 06-05-2018 06:42
    Hello,

    this post gives more informations according the automatic link creation.

    https://community.extremenetworks.com/extreme/topics/oneview-maps-building-links-between-non-extreme...

    In addition if you have still problems a workaround can be to draw the links manually.

    Best regards
    Stephan


  • 3.  RE: Netsight Map view

    Posted 06-05-2018 07:10
    Hi,
    thx for the answer.llpd works good and i see all information i need.

    The problem is that i can see on the map only links witch configuration interswitch.In some of the connection are access and i can not change it on the map or on teh router......:-(


  • 4.  RE: Netsight Map view

    Posted 06-05-2018 11:10
    I also have this problem with non-extreme devices. The lldp neighbor information shows each other on both nodes but the links are not created between them. I have also imported the MIBs from the vendor into the 3rd party folder and this does not help. I have even tried manually creating the links and when the screen refreshes they disappear.

    I was told it would be fixed in version 8.1 but I am running 8.1.2.59 and it's still not fixed.



  • 5.  RE: Netsight Map view

    Posted 06-06-2018 04:34
    Yes, this is what i do not like by Extreme...


  • 6.  RE: Netsight Map view

    Posted 06-06-2018 04:39
    I have no idea what i can do yet....When i want to creat a limk i must configure this link auf interswitch.This is unfeasibly...


  • 7.  RE: Netsight Map view

    Posted 06-06-2018 05:03
    Point one.i must unlook 0ne port on my router, only port to create a new link


    Pont 2.I must unconfigure the port to interswitch to se the link in my map


    How can io do it......


  • 8.  RE: Netsight Map view

    Posted 06-20-2018 03:24
    Good Morning boys and girls.
    i can´t believe that nowbody can help me.
    I think this is a great problem of the management software from extreme and it´s incredible that
    nowbody fixthis bug.

    My Question again.

    How can i change the link-mode between the nodes on my maps to type Interswitch?Only this types will displayed on the map:
    THOMAS




  • 9.  RE: Netsight Map view

    Posted 06-20-2018 03:24
    Hello Thomas,

    I can not confirm the behavior, you told, with my installation. I can create links with interswitch and access ports with different third party devices

    Best regards
    Stephan


  • 10.  RE: Netsight Map view

    Posted 06-20-2018 03:24
    I am using version 8.1.3.65 and the links are printed in the maps.


  • 11.  RE: Netsight Map view

    Posted 06-20-2018 03:24
    Ok,
    I am using version 8.1.2.59.


  • 12.  RE: Netsight Map view

    Posted 06-27-2018 04:53
    Hi,
    THX for the great hint to help me.After upgrading to the new version of Netsight the maps work perfekt.
    Thank you for the hint..
    Thomas