ExtremeCloud IQ- Site Engine & Extreme Management Center

 View Only
  • 1.  ELRP traps w/Epicenter

    Posted 04-23-2015 02:53
    We are using Epicenter 7 (we know EOL for epicenter was awhile ago).
    We are managing many deivces. Now we are trying to setup traps with ELRP w/a XOS device.
    Everything was setup, we mimicked a loop, but saw no traps via the alarm manager. Then on a ref manual for extreme [EPICenter 7.0 Reference Guide Rev. 03 - Extreme Networks], I found this listed under SNMP traps section.....

    ELRP VLAN Loop Detected

    Extreme Networks proprietary trap. Generated when the ELRP
    client detects a loop in the VLAN.

    ExtremeWare 7.3
    Not supported in
    ExtremeXOS

    The device tested is with an XOS device.



  • 2.  RE: ELRP traps w/Epicenter

    Posted 04-23-2015 04:04
    ELRP is supported in XOS


  • 3.  RE: ELRP traps w/Epicenter

    Posted 04-23-2015 04:06
    This I know.. Let me rephrase it, can Epicenter recognize SNMP ELRP traps via a xos device?

    ty


  • 4.  RE: ELRP traps w/Epicenter

    Posted 04-23-2015 04:14
    I don.t know. I work with Netsight. I had to add the snmp trap of ELRP in Netsight. Probably you have to do this also in Epicenter

    EVENT extremeElrpVlanLoopDetected .1.3.6.1.4.1.1916.4.6.0.1



  • 5.  RE: ELRP traps w/Epicenter

    Posted 04-23-2015 04:36
    TY johan.....do you know where abouts in Epicenter this would be added?



  • 6.  RE: ELRP traps w/Epicenter

    Posted 04-23-2015 04:45
    Sorry, I don't know what you have to change


  • 7.  RE: ELRP traps w/Epicenter

    Posted 04-23-2015 06:08
    ty. but u said Probably you have to do this also in EpicenterEVENT extremeElrpVlanLoopDetected .1.3.6.1.4.1.1916.4.6.0.1

    Does this get added somewhere to cause the trap to be triggered if the event occurs?


  • 8.  RE: ELRP traps w/Epicenter

    Posted 04-23-2015 07:07
    Yes, It has to be added somewhere so that Epicenter know what to do if it receive this event.