ExtremeCloud IQ- Site Engine & Extreme Management Center

  • 1.  SHOW IP PORT

    Posted 08-29-2018 06:36
    I do not view all ip connected to all of 48 ports of my switch (series B5 and seris X450) .

    I 'll accept to use "extreme management server" also CLI command or device terminal


  • 2.  RE: SHOW IP PORT

    Posted 08-29-2018 07:32
    Hello Visconti,

    First of all, B5 and X450-G2 with newer firmware have a Node Alias feature that is kind of port-IP table that works even if the switch works just as a L2 device. Please have in mind, some entries will stay there even if there's no longer a particular IP and they have to age like MAC entries in FDB tables.
    Is your X450 a '-G2' or just X450? What is the firmware version?
    For nodealias feature you might want to take a look here:
    https://documentation.extremenetworks.com/exos_22.5/EXOS_User_Guide_22_5.pdf
    https://documentation.extremenetworks.com/Active_Archive/B-Series/B-5/SW_Doc/9034706-01_B5_CLIRef_FW681.pdf

    Basics for Node Alias in EXOS:
    enable nodealias port all
    show nodealias
    show nodealias port
    show nodealias mac


  • 3.  RE: SHOW IP PORT

    Posted 08-29-2018 07:53
    X450 G2 GE4 firmware 22.4 and be firmware 6.81 and 6.71
    I have the windows version 8 of exytreme mangm. server (not virtual machines)
    I have set the alias field in configure device -> ports but i want also to know wath is the ip port connected to a specific port (active..color green) but with IP not defined


  • 4.  RE: SHOW IP PORT

    Posted 08-29-2018 07:53
    Visconti,

    If I understood well, you might find Flexview useful within XMC if you don't have plans for NAC. Check this out:




    Does it suit you?

    Regards,
    Tomasz


  • 5.  RE: SHOW IP PORT

    Posted 08-29-2018 07:53
    I'm sorry but compare a White page


  • 6.  RE: SHOW IP PORT

    Posted 08-29-2018 11:56
    If you've got an IP address configured on the VLANs for those ports, I think the
    code:
    show iparp
    command is what you'll want.
    https://documentation.extremenetworks.com/exos_22.3/EXOS_21_1/EXOS_Commands_All/r_show-iparp.shtml



  • 7.  RE: SHOW IP PORT

    Posted 08-29-2018 11:56
    no my pc with "extreme managment center" (IP 192.168.10.130) is connected in a port that is configurated in "VLAN managment" for monitoring the class IP (10.xxx) of all the switch