ExtremeCloud IQ- Site Engine & Extreme Management Center

  • 1.  Netsight Flexview rows

    Posted 05-20-2016 14:00
    I am trying to create a flexview that contains the IP address, Model #, Serial #, Manufacture date, location, switch type and slot id. I have successfully gotten the all of the columns except for the slot ID to work. I have tried to use entPhysicalDescr which contains the slot number, and extremeSlotNumber & extremeSlotName which also contains the information. But when it is run, the slot numbers do not correspond. the tpl is as follows:






  • 2.  RE: Netsight Flexview rows

    Posted 05-24-2016 17:03
    So I figured out a working solution:

    I used the Instance column and created the following expression=

    row=({ "Instance":2:[$] } );
    IF row[0] == 1 THEN "Stack"
    ELSE IF row[0] == 3 THEN "Slot-" + (row[0] - 2)
    ELSE IF row[0] == 5 THEN "Slot-" + (row[0] - 3)
    ELSE IF row[0] == 7 THEN "Slot-" + (row[0] - 4)
    ELSE IF row[0] == 9 THEN "Slot-" + (row[0] - 5)
    ELSE IF row[0] == 11 THEN "Slot-" + (row[0] - 6)
    ELSE IF row[0] == 13 THEN "Slot-" + (row[0] - 7)
    ELSE IF row[0] == 15 THEN "Slot-" + (row[0] - 8)
    ELSE IF row[0] == 17 THEN "Slot-" + (row[0] - 9)
    ELSE IF row[0] == 19 THEN "Slot-" + (row[0] - 10)
    ELSE IF row[0] == 21 THEN "Slot-" + (row[0] - 11)
    else "N/A"

    This gives the slot number for each of the members.



  • 3.  RE: Netsight Flexview rows

    Posted 05-24-2016 17:03
    It seems the community may have let you down on this one. Thanks for coming back to post a solution for others who may have the same question!

    -Drew


  • 4.  RE: Netsight Flexview rows

    Posted 09-13-2016 09:01
    Hi Crymond,

    could you attach the final version of the flexview code?

    I'm trying to do s script to view netlogin enabled port associated to switch type (or slot type) and slot number.

    Thank you very much