ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

Is there a report or flexview to see what the primairy and secondairy firmware is ?

  • 1.  Is there a report or flexview to see what the primairy and secondairy firmware is ?

    Posted 10-16-2018 04:36

    Is there a report or flexview to see what the primairy and secondairy firmware is ?

    And which is active ?



  • 2.  RE: Is there a report or flexview to see what the primairy and secondairy firmware is ?

    Posted 10-16-2018 15:27
    1.3.6.1.4.1.1916.1.1.1.13 is the primary firmware image version, 1.3.6.1.4.1.1916.1.1.1.14 is the secondary, 1.3.6.1.4.1.1916.1.1.1.15 is the one to use on next reboot, and 1.3.6.1.4.1.1916.1.1.1.32 is the image that was booted (1=primary, 2=secondary).


  • 3.  RE: Is there a report or flexview to see what the primairy and secondairy firmware is ?

    Posted 10-16-2018 16:17
    Hello Johan,

    here a suitable flexview. Copy the xml code in a text file with .tpl and save it in "/usr/local/Extreme_Networks/NetSight/appdata/System/FlexViews/My FlexViews"
    if you are using a Linux installation.


    Best regards Stephan[/code]


  • 4.  RE: Is there a report or flexview to see what the primairy and secondairy firmware is ?

    Posted 10-16-2018 16:24

    Here you can see what it looks like:




  • 5.  RE: Is there a report or flexview to see what the primairy and secondairy firmware is ?

    Posted 10-16-2018 16:24

    Thanks.