ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

Trying to use XMC to download summit firmware and getting an error incomplete command

  • 1.  Trying to use XMC to download summit firmware and getting an error incomplete command

    Posted 07-03-2018 15:27
    I have an X450G2 24 port test switch and I wanted to see if XMC (Netsight) could push the newer SummitX-22.5.1.7.xos firmware file to it. The firmware is loaded and I attempted to have this pushed to the switch. After about 8 minutes or so of no progress, it eventually errored out. I went over to the Events tab and under the Inventory Server category there is a Firmware Download Event with the following details:

    Firmware Download summitX-22.5.1.7.xos: (10.1.0.111) - Error Downloading Firmware. See event log for details. : X450G2-24p-G4.1 # enable %% Incomplete command X450G2-24p-G4.2 # upgrade tftp://10.1.0.110/firmware/images/summitX-22.5.1.7.xos ^ %% Invalid input detected at '^' marker. X450G2-24p-G4.3 # exit

    Any idea how to get this to work? This is my test switch and I want to perfect this capability before I would attempt to use it on my core X690s someday when I get the courage to update each VRRP capable core.


  • 2.  RE: Trying to use XMC to download summit firmware and getting an error incomplete command

    Posted 07-03-2018 15:44
    Nevermind, figured it out. Had to do Set configuration, choose Script for both options and then ExtremeXOS - TFTP for Device Family Definition Filename. It worked!