ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

Need assistance adding Juniper switches into XMC

  • 1.  Need assistance adding Juniper switches into XMC

    Posted 12-01-2017 19:40
    I am demoing XMC in my lab (I'm a partner) and am trying to figure out how to get more information from my Juniper switches via snmp. I have successfully added a few devices via snmp for UP/DOWN status and some basic interface stats, but I'm lacking CPU/MEMORY information along with chassis and serial number info. Is there a way to fix this?

    I'm also trying to manage configurations and firmware on these devices, how can this be achieved on a Juniper EX switch?

    I am running NetSight Suite 8.0.3.53 in a virtual machine and Junos 15.1X53-D51 the EX2300 switch.

    Relevant Juniper SNMP config:

    [/code]community public {
    authorization read-write;
    clients {
    10.30.11.230/32;
    }
    }
    trap-options {
    source-address 10.30.11.101;
    }
    trap-group xmc {
    version v2;
    targets {
    10.30.11.230;
    }
    }



  • 2.  RE: Need assistance adding Juniper switches into XMC

    Posted 12-02-2017 10:26
    Hi Daniel,

    You can try by importing the Juniper MIBS into EMC and check. Please visit the below link for information on importing the MIBS.

    https://gtacknowledge.extremenetworks.com/articles/How_To/Netsight-Importing-a-MIB-into-Netsight



  • 3.  RE: Need assistance adding Juniper switches into XMC

    Posted 12-02-2017 19:14
    Thanks. The Juniper Mibs came in an archive, do they need to be extracted before I transfer them into MyMibs?


  • 4.  RE: Need assistance adding Juniper switches into XMC

    Posted 12-04-2017 05:36
    They should be extracted. It should generally be a text file.