ExtremeCloud IQ- Site Engine & Extreme Management Center

 View Only
  • 1.  Adding ELRP Trap to NetSight 6.1 Alarm Manager

    Posted 08-20-2014 12:56
    I'm trying to add a new alarm trap to NetSight.

    I want all my switches to send a trap to netsight when ELRP detects a loop.

    I've created a custom alarm from it but there doesnt seem to be any trap for ELRP.

    I know the MIBs are on the server just no idea how to add them.


  • 2.  RE: Adding ELRP Trap to NetSight 6.1 Alarm Manager

    Posted 08-21-2014 06:20
    Append on the server in the file \NetSight\services\trapd.conf:

    (make a copy of the file first)

    #

    EVENT extremeElrpVlanLoopDetected .1.3.6.1.4.1.1916.4.6.0.1 "Status Alarms" Major

    FORMAT Loop Detected

    SDESC

    There is a loop detected on the network

    EDESC

    #



    Restart the services.

    Now you can create the alarm and select the trap 'extremeElrpVlanLoopDetected'



  • 3.  RE: Adding ELRP Trap to NetSight 6.1 Alarm Manager

    Posted 08-21-2014 06:20
    Can I just cut and paste this reply to the trapd.conf file and restart netsight? Then just create the new alarm and select the extremeElrpVlanLoopDetected. I am just trying to make sure I understand the Johan's instructions.


  • 4.  RE: Adding ELRP Trap to NetSight 6.1 Alarm Manager

    Posted 08-21-2014 06:20
    Bob,

    Just cut and paste.



  • 5.  RE: Adding ELRP Trap to NetSight 6.1 Alarm Manager

    Posted 08-21-2014 06:20
    Thanks Johan!


  • 6.  RE: Adding ELRP Trap to NetSight 6.1 Alarm Manager

    Posted 08-29-2014 07:56
    Perfect thank you


  • 7.  RE: Adding ELRP Trap to NetSight 6.1 Alarm Manager

    Posted 10-13-2014 13:41
    Hi Johan and Ian,
    could you tell me wich services I have to restart in order to view the new trap on alarm manager?

    I have restarted snmpd and nssnmptrapd but I didn't see the new trap.
    I have seen it only after restarting the server.

    Thank you in advance,
    Regards


  • 8.  RE: Adding ELRP Trap to NetSight 6.1 Alarm Manager

    Posted 11-19-2014 07:28
    ! had the same problem. I have to restart the server to



  • 9.  RE: Adding ELRP Trap to NetSight 6.1 Alarm Manager

    Posted 03-02-2015 11:14
    Hello,

    I have successfuly create ELRP trap alarm. Comparing to Ridgeline, Netsight gives out less details of ELRP. How to add more details to ELRP alarm mail. I tryed adding stuff but did not receive satisfactory output. I wanted to receive affected vlan and port. Used Arguments: $trapArgs
    Subtype: $alarmSubcomponent but those two give out nothing.

    BR
    Davor



  • 10.  RE: Adding ELRP Trap to NetSight 6.1 Alarm Manager

    Posted 08-13-2015 13:33
    Have you tried the $message keyword?