ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

Can EMC display LLDP neighbor info?

  • 1.  Can EMC display LLDP neighbor info?

    Posted 02-19-2018 09:43
    Hello,

    I Would like to find out about the above, specifically i would like to know how many Reach NXT devices we have on the network without having to display lldp info from each switch.

    I'm sure back in the day Extremes old management platform, EpiCentre/Ridgeline did this but i can't work out how to in EMC.

    Thanks
    Ian


  • 2.  RE: Can EMC display LLDP neighbor info?

    Posted 02-19-2018 09:58
    Hi Ian,

    Right click to your device on EMC->Network->Devices part and choose view->flexview and there is an option "LLDP Remote Systems"

    this will show you all lldp-enabled devices.


  • 3.  RE: Can EMC display LLDP neighbor info?

    Posted 02-19-2018 10:03
    thank you for that.

    can it be done for the network as a whole? it seems to default to a particular switch each time I run it.

    I'm highlighting in the tree view, "My Network" then using the 3 horizontal line menu to choose view etc.


  • 4.  RE: Can EMC display LLDP neighbor info?

    Posted 02-19-2018 10:19
    as far as I know, it's only showing for one device.


  • 5.  RE: Can EMC display LLDP neighbor info?

    Posted 02-19-2018 16:16
    Hi.

    You can select set of swtiches and run the flexview on set of switches.
    There were different limits in the past for different XMC/EMC versions.
    If web interface does not allow you to run the flexview on all your network then Java client does it without issues.

    Z.


  • 6.  RE: Can EMC display LLDP neighbor info?

    Posted 02-20-2018 10:38
    is there a way a feature can be added to display Reach NXTs separately? for instance listed in the device view? they are essentially separate devices.......