ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

Failed to schedule script request

  • 1.  Failed to schedule script request

    Posted 07-13-2017 22:52
    I've created a script task, which works in it's own right. But now I'm trying to run it with the Scheduler, so that I can email the results to myself. When the scheduled run time hits, I see the Status turn red, to "Error Occurred". When click this, I see "Failed to schedule script request: Error count: 1". No email comes through to me and I can't tell if the script is running at all.
    Any ideas? Could I view some logs somewhere in NetSight to get more information on this error?
    Thanks!!


  • 2.  RE: Failed to schedule script request

    Posted 10-08-2018 04:02

    Hello Martin,

    i have the same failure. But on my issue i became an E-Mail but the reboot command in the script wasn't done.

    following was typed in the tcl script:

    reboot
    y



  • 3.  RE: Failed to schedule script request

    Posted 10-09-2018 05:13

    Hello together,

    today i reached a partial success.
    Namely that i could restart the Switch with Scripting.
    An advice i could get from this article: https://community.extremenetworks.com/extreme/topics/cant-import-api-from-exos
    It is prefered to write the script language in JSONRPC. So i did and it worked.
    Nonetheless the log of the mail described a failure which was not correct.
    Therefore partial success. I have to look further.

    I hope that this will help you to reach your Goal.