ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

Creating Netsight FlexView for requesting "WLAN DCS Average Channel Utilization"

  • 1.  Creating Netsight FlexView for requesting "WLAN DCS Average Channel Utilization"

    Posted 11-04-2015 16:08

    I want to configure a FlexView within Netsight Console for showing me all Values of "WLAN DCS Average Channel Utilization" - for all APs and for all Radios - with one Request.

    Why - see here: https://extremeportal.force.com/ExtrArticleDetail?an=000089320

     

    RackMultipart20151104-8240-lct8b3-FlexView-DCS-Average-Channel-Utilization_inline.jpg

     


    For a first start i get all information (by modify a prefinied Netsight Flexview).

    But for a better overview i have to hide the first interfaces because this are the configured SSIDs which deliver no "DCS Channel Util Data".
    Next is to hide the every ethernet LAN Interface from every AP.

    How can i achieve this with FlexView ?

    Here the WLAN-DCS-Channel-Utilization.tpl code:
    [/code]

    WLAN-DCS-Channel-Utilization
    com.ets.nac.tables.TbModel
    ReqID

    OID::ReqID:::SNMP::ReqID
    IP Address

    OID::IP Address:::SNMP::IP Address
    Interface

    OID::Instance:::SNMP::Instance
    Name
    The textual name of the interface.
    OID::ifName:::SNMP::SNMP;false;15;3;false;false;5;2;0;0;0;0;0
    Type
    The type of interface.
    OID::ifType:::SNMP::SNMP;false;2;4;false;false;4;2;0;0;0;0;0
    Description
    The textual description of the interface.
    OID::ifDescr:::SNMP::SNMP;false;15;5;false;false;4;2;0;0;0;0;0
    Alias
    The user specified name for this interface.
    OID::ifAlias:::SNMP::SNMPW;false;15;6;true;false;6;2;0;0;0;0;0
    dot11ExtRadioAvgChlOccCount
    The textual name of the interface.
    OID::dot11ExtRadioAvgChlOccCount:::SNMP::SNMP;false;2;7;false;false;5;2;0;0;0;0;0
    This view displays MIB-II interface information.
    TBLHASH::::TBLHDR::0;0;false;30;ifXEntry;V.0.3.3.0;0;0;113[/code]

     



  • 2.  RE: Creating Netsight FlexView for requesting "WLAN DCS Average Channel Utilization"

    Posted 11-04-2015 16:34
    Assuming you are trying to 'remove rows' that are not responding.
    Given that all OIDs appear to have the same index (ifIndex)
    Then basic rule should work.

    Set the primary OID: As default request -- this will be the only rows you then show.
    Move 'ifType" to request block 2 -- (get Instance using the default request )
    Move ifName & ifAlias to block 3 -- (get instance off the first table )
    save.
    In FlexView editor I would check the [x] Hide instance column ifIndex is not really of much help.
    to change the 'Request Group" as asked above click on the OID columns and use the combo box.
    When you are done make sure only the 'key OID' is in the default request group.


  • 3.  RE: Creating Netsight FlexView for requesting "WLAN DCS Average Channel Utilization"

    Posted 11-05-2015 09:27
    Many thanks to Daniel! - It works.