ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

Oneview switch connections - switches don't show link when using management port

  • 1.  Oneview switch connections - switches don't show link when using management port

    Posted 08-15-2017 19:19
    When looking at the network map in Oneview - switches don't show the link when using the management port - is there a way to have oneview display those links?


  • 2.  RE: Oneview switch connections - switches don't show link when using management port

    Posted 08-20-2017 07:58
    Hi,

    The links are detected based on CDP (Exteme, Enterasys, Cabletron Proprietary), EDP, and LLDP.

    As far as i know EXOS does not support LLDP or EDP in Management ports

    Here is an detailed article on how the links are formed in OneView.
    https://gtacknowledge.extremenetworks.com/articles/Q_A/How-do-MAP-views-from-OneView-create-links

    In case if you would like to create manual links for management ports it is possible from EMC 8.0
    Here is an article on how to create manual links between devices.
    https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-it-possible-to-create-manual-links-between...

    I hope this helps!