ExtremeCloud IQ- Site Engine & Extreme Management Center

Expand all | Collapse all

Share your custom Flexviews with the community

  • 1.  Share your custom Flexviews with the community

    Posted 10-28-2013 18:01
    I have created a few custom Flexviews and find these really valuable. For example one custom Flexview queries my APC UPS and reports power consumption, battery life, and estimated run time. I'm sure others in the community have created their own custom Flexviews. My suggestion would be to allow users to upload their custom flexviews and share these with the community. This will help novices and veterans alike by giving them another resource to quickly expand the functionality of Netsight. If this idea takes off I would also recommend that within Netsight there is an easy import tool of Flexviews. (There might already be but I haven't found it. Currently I copy these from the directory itself.) Let me know what you think.


  • 2.  RE: Share your custom Flexviews with the community

    Posted 10-28-2013 23:40
    Stephen, That is a great idea. I have saved a number of these over the years with assistance with Bob Maheu. If this site is created then I would share my Flexviews to the space available. I can also share them now if needed such as emailing them through our SecureFTP site Jason


  • 3.  RE: Share your custom Flexviews with the community

    Posted 10-28-2013 23:40
    Please see the folder "Documents Referenced in Topic Replies" for over 70 or so Flexviews that I asked Dan Makros to post Please enjoy Jason


  • 4.  RE: Share your custom Flexviews with the community

    Posted 10-28-2013 23:40
    Hi Jason, Perhaps the excitement or just being new to, "The Hub", today 🙂, but I can't find the, "Documents Referenced in Topic Replies", you mentioned.


  • 5.  RE: Share your custom Flexviews with the community

    Posted 10-28-2013 23:40
    HTTPS://Enterasys.box.com and select "Documents referenced in topic replies" That should work for you I am new at this too 😉


  • 6.  RE: Share your custom Flexviews with the community

    Posted 10-28-2013 23:40
    Hi Jason, I've created a Box account, but the link above just jumps to my account. Do you still need to share it or invite me to collaborate?


  • 7.  RE: Share your custom Flexviews with the community

    Posted 10-28-2013 23:40
    If you can invite me also please It would be great. thx. Z.


  • 8.  RE: Share your custom Flexviews with the community



  • 9.  RE: Share your custom Flexviews with the community

    Posted 10-28-2013 23:40
    I made a mistake. I need to create a link to each flexview. I am working on it. Learning in progress for me 🙂


  • 10.  RE: Share your custom Flexviews with the community



  • 11.  RE: Share your custom Flexviews with the community



  • 12.  RE: Share your custom Flexviews with the community

    Posted 10-29-2013 11:20
    Stephen, this is a great idea! If you would like to share Flexviews within the community, any file sharing application (Box, Dropbox, etc) can be embedded into a reply. All that is required is to make sure what you are sharing is a public document and then the community can benefit from this. If you would like to share your in this fashion, please feel free to do so in this topic!

    I am not entirely sure about sharing them in Netsight. I will share this idea with our Product Management team and they will update. Thank you!


  • 13.  RE: Share your custom Flexviews with the community



  • 14.  RE: Share your custom Flexviews with the community



  • 15.  RE: Share your custom Flexviews with the community

    Posted 11-05-2013 07:02
    I really haven't spent enough time creating new Flexviews, so I think this is a great idea. I've recently seen a number of demonstrations of software applications that seem to monitor MOS scores on our Enterasys network, simply via SNMP. I'm wondering if anybody knows how we can do this via Flexviews?


  • 16.  RE: Share your custom Flexviews with the community

    Posted 11-05-2013 07:02
    This is a great question on its own and I think others in the community might have recommendations for this question. Please reference the new topic here: Has anyone monitored MOS scores with Flexviews?


  • 17.  RE: Share your custom Flexviews with the community

    Posted 11-06-2013 04:49
    Simon, I am not aware of a way as I do not think that there is a MIB for this information Maybe others would know this answer Jason


  • 18.  RE: Share your custom Flexviews with the community

    Posted 11-08-2013 21:51
    All, FYI I will try to share more of the Flexviews I collected over the years in the future Jason


  • 19.  RE: Share your custom Flexviews with the community

    Posted 08-05-2014 18:14
    Jason,

    Please re-enable the Flexviews you had put out there previously. Box indicates they have been removed. Thanks

    Bob



  • 20.  RE: Share your custom Flexviews with the community

    Posted 08-05-2014 19:08
    I will need to find a new location to store these Someone else have requested the files and I sent some directly to them Please feel free to send me your email address and I can send you a zipped file


  • 21.  RE: Share your custom Flexviews with the community

    Posted 08-05-2014 19:08
    Jason can you share me the link or send me the files?
    Best Ragrds
    Roberto


  • 22.  RE: Share your custom Flexviews with the community

    Posted 09-10-2015 12:22
    Jason,

    I am still interested in any custom Flexviews you have.
    Bob
    nielsenr@mail.nih.gov



  • 23.  RE: Share your custom Flexviews with the community

    Posted 01-10-2016 21:09
    Hi,

    this one is under construction and most probably be "under construction" for long time, but you can benefit from what I gathered over decades: http://extr.eu/NetSightFlexviews.htm

    Good luck.

    Zdenek


  • 24.  RE: Share your custom Flexviews with the community

    Posted 05-18-2016 08:14
    We have now GitHub available with this topic. feel free to contribute https://github.com/extremenetworks/Netsight-Report-Views/blob/master/FlexView/README.md


  • 25.  RE: Share your custom Flexviews with the community

    Posted 05-18-2016 09:54
    Pala,

    Thanks for the great information. Any chance that you can add the FlexViews that were mentioned at the beginning of the post?

    Also, is there anything special that needs to be done with the AP3000 FlexViews? We ran them against our controller in console (6.3.0.168), but received no results. We made the assumption that they should work for 3610/3705/3805, etc.

    Thanks,

    Bill



  • 26.  RE: Share your custom Flexviews with the community

    Posted 05-18-2016 09:54
    Hi Bill.

    In the past there was AP3000 = standalone AP from Enterasys/Cabletron.
    Flexviews in AP3000 directory are only for those standalone APs. those FlexViews are not for AP36xx or AP37xx or AP38xx or AP39xx.

    All information available in the AP3000 directory are "out-of-the-box" available in ExtremeManagement (NetSight) already. Just choose one of those built-in.

    let us know what information you would like to have in the Flexview

    Z.


  • 27.  RE: Share your custom Flexviews with the community

    Posted 05-18-2016 09:54
    Hi Bill

    I added all flexviews from this thread I tested and they works.

    Some were not working for me and I stored on my disk for later investigation why they do not work. you can still download them and test them by your own (http://extr.eu/NetSightFlexviews.htm)

    Z.


  • 28.  RE: Share your custom Flexviews with the community

    Posted 05-18-2016 09:54
    We need to get those over to our GitHub page :)