Wireless (General)

 View Only
  • 1.  AP302W - wired ports

    Posted 03-17-2022 02:01
    Hello,

    We would like to use the internal ports of the AP302W and I was wondering whether someone could point me in the right direction.

    Questions:
    - Can I have different VLANs on different ports of the AP302W?
    - Where do I configure the VLANs for the wired ports of the AP302W?
    -- The XCC offers speed settings. Where would I find other settings?

    Your input is much appreciated.

    Thank you,

    Klaus


  • 2.  RE: AP302W - wired ports

    Posted 03-17-2022 11:41
    Hello Klaus,

    Yes, you can have different VLANs on wired ports of AP302W.
    I've run lately installation (still not in production), where I am using those APs managed by Cloud IQ.
    I have set VLANs for VoIP and SmartTV on ETH1 and ETH2, respectively; ETH0 is a trunk port.

    In Cloud IQ you have to define Network Policy and assign it to AP during onboarding.
    Within the policy you have to define device template and port types.
    Then you just assign port type to specific wired port of AP302W.
    Remember to set port type for AP302W uplink port as a trunk, carrying all VLANs (including those used for WiFi service).

    I think it could be done in XCC environment as well.

    REGARDS
    Robert


  • 3.  RE: AP302W - wired ports

    Posted 03-23-2022 18:39
    Hello Robert,

    Thank you for pointing me in the right direction.
    TAC was also able to help and created this "How To article".

    https://extremeportal.force.com/ExtrArticleDetail?an=000103556

    Kind regards,
    Klaus