I´ll try better, this is my working environment (VXLAN+FRAGMENTATION) , My deploy is L2 link with MTU less 1600 bytes between two FIGWs and it´s working fine:
Now I want to add IPSEC but I'm unable to add the necessary commands because there are exclusion with this config.
After my investigation I see that all topologies with IPSEC are over L3 networks,
so I begin to suspect that it´s not supported over L2 links.
It´s a question about topologies supported with FIGW and IPSEC.
Contact Us:Sam PirokCommunity@extremenetworks.com