Question

Checking RIB and FIB on Brocade 2024?

  • 19 June 2020
  • 5 replies
  • 287 views

Hello, can anyone confirm the correct way to check the RIB and FIB on Brocade 2024? Wanting to ensure i’m not over recommended capacity, chasing memory problems….

 

Is it:

RIB - show ip route

FIB - show ip BGP

 

?


5 replies

Userlevel 3

Ah sorry, missed the 2024 in the subject. For the CER you need to rconsole into the lp:

SSH@rt1# rconsole 1
Remote connection to LP slot 1 established
Press CTRL-X or type 'exit' to disconnect it
LP-1>show cam-partition usage

 

Brocade CER 2024 - Part #: 40-1000859-13

Userlevel 3

What is your hardware model?

Hmm I don’t seem to have cam-partition usage, my show cam options...:

show cam ?
  l2acl                  Show cam Layer 2 sessions
  l2out                  Show cam Layer 2 outbound
  l4                     Show cam Layer 4
  l4out                  Show cam Layer 4 outbound
  v4sacl                 Show cam IPv4 Super ACL
  v6acl                  Show cam Ipv6 sessions
  v6out                  Show cam Ipv6 outbound
  v6sacl                 Show cam Ipv6 Super ACL 

 

show ip route works well:

#show ip route

Total number of IP routes: XXXXXX

Userlevel 3

For NetIron FIB and e.g. interface ethernet 4/1

show cam ethernet  4/1
show cam ip 4/1
show cam ipv6 4/1
show cam ?

General / usage

show cam-partition usage

For RIB  IPv4 it is like you said.

Reply