Is there really no option to create VRF with different local-as on SLX9740 ?
Cant find any option to do this… and also cant find any manual that explain that it is possible
Is this different than 9540?
vrf foo address-family ipv4 unicastrouter bgp address-family ipv4 unicast vrf foo local-as 4556
vrf foo address-family ipv4 unicast
address-family ipv4 unicast vrf foo local-as 4556
yes it is
(config-vrf-RKGM01)# address-family ipv4 unicast (config-vrf-RKGM01-ipv4-unicast)# ? Possible completions: arp Address Resolution Protocol (ARP) bgp Set next-hop for BGP describe Display transparent command information do Run an operational-mode command exit Exit from current mode export Apply a route-map filter on the routes to be exported help Provide help information import Apply a route-map filter on the routes to be imported ip The Internet Protocol (IP). max-route Maximum number of routes allowed in this routing table no Negate a command or set its defaults pwd Display current mode path route-target Configure Target VPN Extended Communities top Exit to top level and optionally run command
As You can see no router bgp for vrf instance
conf t Entering configuration mode terminalrouter bgp address-family ipv6 unicast vrf RKGM01loca ^% Invalid inpPossible completions: additional-paths Specify bgp additional paths advertise-best-external Advertise best external path to internal peers aggregate-address Configure BGP aggregate entries always-propagate Allow readvertisement of best BGP routes not in IP Forwarding table bgp-redistribute-internal Allow redistribution of iBGP routes into IGPs client-to-client-reflection Configure client to client route reflection dampening Enable route-flap dampening default-information-originate Originate Default Information default-metric Set metric of redistributed routes describe Display transparent command information do Run an operational-mode command exit Exit from current mode graceful-restart Enables the BGP graceful restart capability help Provide help information listen-range Listen range prefix maximum-paths Forward packets over multiple paths multipath Enable multipath for ibgp or ebgp neighbors only neighbor Specify a neighbor router network Specify a network to announce via BGP next-hop-enable-default Enable default route for BGP next-hop lookup next-hop-recursion Perform next-hop recursive lookup for BGP route no Negate a command or set its defaults pwd Display current mode path redistribute Redistribute information from another routing protocol rib-route-limit Limit BGP rib count in routing table table-map Map external entry attributes into routing table top Exit to top level and optionally run command update-time Configure igp route update intervalut detected at '^' marker.
It looks like there is no local-as option for ipv6 unicast - but it is in ipv4 unicast for VRF
Looks like bug.
Can confirm on latest version, that this function seems to be missing for ipv6 unicast.
Already have an account? Login
No account yet? Create an account
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.