Header Only - DO NOT REMOVE - Extreme Networks

MR Management Module Sync to standby Card

  • 23 April 2019
  • 2 replies

I have in the past and wanted to confirm if have running MR card in primary slot and install new card in secondary slot it will sync image and configuration.. i believe done this in the past. Second part any issues with primary running slot a MR and new card in secondary slot a MR2 and it also sync

2 replies

Userlevel 1
For MLX,

Answer to first part: Yes, if you put a MR module in the second slot, the software and config will sync with the Active Management module.

Answer to second part: We do not recommend to use two different types of Management modules in the same chassis.
To provide an accurate answer to your question, please elaborate ...
  1. what platform is this modular chassis in question? VDX 8770-4/8770-8 or SLX 9850-4/9850/8?
  2. what version of OS running? NOS version#(?) and/or SLXOS version #?
  3. what do you mean by MR and MR2? do you have the output for show chassis? serial # and model #? Is MR2 means the second Management Module of the same kind or they are of different version?
please provide output of
  • show version
  • show chassis
  • show slot
  • show firmwaredownloadhistory
  • show ha