I need some help with my snmp configuration. I have two NetIron CER2024C. They're used as border gateways. They have vrrp configured and VRF in order to distribute the traffic to the ISP.
The thing is that I have a threshold set for each VRF, but I don't have traps arriving to my Management system when the threshold is reached.
Here's the configuration:
snmp-server community 2 $NW ro 2
snmp-server community 2 $NVUn rw 2
snmp-server contact exi
no snmp-server enable traps ospf
no snmp-server enable traps isis
no snmp-server enable traps vsrp
no snmp-server enable traps udld
snmp-server host 10.1.1.77 version v1 2 $Xj1k
snmp-server host 10.1.1.78 version v1 2 $UXj1k
snmp-server host 10.2.2.114 version v1 2 $
snmp-server host 10.1.1.77 version v2c 2 $NQ==
snmp-server access-group 2
route-map CPREF permit 10
set local-preference 400
route-map IPREF permit 10
set local-preference 300
route-map INPREF permit 10
set local-preference 500
I have traps that are sent for the physical interfaces. Is there possible to do the same but for the logical interfaces?
Thanks in advance!