Solved

VDX6740 VE Interface issue

  • 21 May 2021
  • 1 reply
  • 39 views

Hi everyone,

I configured VRF and Static routing using ve interface. The VLAN is inactive but ve interface status is up.

 Is is possible to force the VE to go down when the VLAN is INACTIVE?

 

sw0# show vlan 500
VLAN             Name            State                      Ports           Classification
(F)-FCoE                                                    (u)-Untagged
(R)-RSPAN                                                   (c)-Converged
(T)-TRANSPARENT                                             (t)-Tagged
================ =============== ========================== =============== ====================
500              VLAN0500        INACTIVE(member port down) Te 2/0/5(u)

 

sw0# show ip interface brief rbridge-id 2

Flags:  U - Unnumbered interface
Interface                          IP-Address         Vrf                               Status                 Protocol
==========================         ==========         ==================                ====================   ========
Ve 500                             10.10.10.2         test                              up                     up
 

                                                            

icon

Best answer by Michael Andreas Dinius 21 May 2021, 11:32

Hello,

 

  The VE will stay up / up on a VDX while there is an active up ISL as there could be active interfaces on other RBridges.

 

Regards

View original

1 reply

Userlevel 1

Hello,

 

  The VE will stay up / up on a VDX while there is an active up ISL as there could be active interfaces on other RBridges.

 

Regards

Reply