ExtremeCloud IQ- Site Engine & Extreme Management Center

 View Only

  • 1.  Hardware Inventory Report

    Posted 17 days ago

    Is there a way to create a report that list which devices have a single power supply installed vs a redundant power supply? or perhaps report the serial number of the power supply unit installed in each of my devices so I would know if only one serial number is reports a second power supply needs to be installed?

    I can see the information stored in the device view, I just cant figure how to run a report against all my devices so I dont have to go into the device view on each device and manually check.



  • 2.  RE: Hardware Inventory Report

    Posted 12 days ago
    Hi - What type of device, EOS or EXOS? If it's EOS, we have 100's of EOS K10's, S4's and even some N7's still in production. We use a flexview run on a  schedule in XMC to print table information and email it to us for each chassis so we can see the number of installed power supplies and their status.
    Original Message


  • 3.  RE: Hardware Inventory Report

    Posted 11 days ago
    Is this a built in Flexview or a custom one you guys built\found?  I have a majority of EOS 7100s, but we are starting to swap them out with EXOS 5520s.
    Original Message


  • 4.  RE: Hardware Inventory Report

    Posted 11 days ago
    I believe it was something custom, I am sure GTAC or our sales engineer must have helped us put it together. It puts everything in a spreadsheet:


    Here is the code in the FlexView if you want to take a look:

    <?xml version="1.0" encoding="UTF-8"?>
    <flextablelist version="8.5.0.169">
    <flextable autoExportCsvTextDelineation="DQUOTE" autoExportFrequencyUnit="Minutes" autoExportFormat="HTML" showHorizontalLines="true" autoExportFilename="" autoExportFileManagement="Replace" highlightBackground="153,255,255,255" class="com.enterasys.netsight.console.client.flexview.FvTable" id="ctChasPowerSupplyState" columnSelectionAllowed="false" autoCreateColumnsFromModel="false" autoExportAllowed="false" autoExportCsvFieldDelimiter="Comma">ctChasPowerSupplyState
    <tableModel>com.ets.nac.tables.TbModel</tableModel>
    <column comparator="com.ets.flextable.col.IntStringComparator" id="0" sortOrder="descending" class="com.enterasys.netsight.console.client.flexview.FvColumn" fixed="true" hidden="true">ReqID
    <notes></notes>
    <dataField>OID::ReqID:::SNMP::ReqID</dataField></column>
    <column comparator="com.ets.nac.tables.TbCompOid" id="1" width="156" sortOrder="ascending" class="com.enterasys.netsight.console.client.flexview.FvColumn" fixed="true" sorted="true" modelIndex="1">IP Address
    <notes></notes>
    <dataField>OID::IP Address:::SNMP::IP Address</dataField></column>
    <column comparator="com.ets.nac.tables.TbCompOid" id="2" sortOrder="descending" class="com.enterasys.netsight.console.client.flexview.FvColumn" fixed="true" hidden="true" modelIndex="2">Instance
    <notes></notes>
    <dataField>OID::Instance:::SNMP::Instance</dataField></column>
    <column comparator="com.ets.flextable.col.IntStringComparator" id="101" width="195" sortOrder="descending" class="com.enterasys.netsight.console.client.flexview.FvColumn" modelIndex="3">ctChasPowerSupplyNum
    <notes></notes>
    <dataField>OID::ctChasPowerSupplyNum:::SNMP::SNMP;false;2;3;false;false;4;2;0;0;0;0;0</dataField></column>
    <column comparator="com.enterasys.netsight.console.client.flexview.FvCompMibEnum" id="100" width="319" sortOrder="descending" class="com.enterasys.netsight.console.client.flexview.FvColumn" modelIndex="4">ctChasPowerSupplyState
    <notes></notes>
    <dataField>OID::ctChasPowerSupplyState:::SNMP::SNMP;false;2;4;false;false;4;2;0;0;0;0;0</dataField></column>
    <notes></notes>
    <dataField>TBLHASH::::TBLHDR::0;0;true;30;ctChasPowerEntry;V.0.3.3.0;0;0;105</dataField></flextable></flextablelist>


    Original Message


  • 5.  RE: Hardware Inventory Report
    Best Answer

    Posted 11 days ago
    Try right clicking the device/devices --> Flexview --> Entity MIB --> Physical Entity Listing.

    Thanks
    -Ryan
    Original Message


  • 6.  RE: Hardware Inventory Report

    Posted 11 days ago
    This looks like it might work for my needs.  Thanks for the help.  Still learning about these FlexView options.
    Original Message