21771 h45l6d inline large

AAA & Radius

Conversations

Recent Conversations
Conversations 1 - 15 of 227
Photo of Brian Holmes
4500 802.1x EAP behavior
We have a 4500 switch running SW:v5.11.1.101 When we connect an 802.1x client, the switch is sending a new authentication request every ...
  • 1 me too
  • 0 replies
  • Problem
Photo of SH
Using TLS Certificate fields for authentication mapping
Hello, can I use TLS certificate fields like "TLS-Cert-Issuer" or "TLS-Cert-Common-Name" (or other fields mentioned here: https://gtackn...
  • 2 me toos
  • 4 replies
  • Question
  • Answered
Photo of Christoph
XOS eapol path-through
Is it possible to configure EAPoL pass-through on XOS? I would need it on Summit X430 switches with firmware version 16.
  • 2 me toos
  • 1 reply
  • Question
  • Answered
Photo of Brian Holmes
IDE 9.4 is interpreting Mac Auth from a Cisco Wireless Lan Controller as a Radius intead of Mac Auth request
IDE 9.4 is interpreting Mac Auth from a Cisco Wireless Lan Controller as a Radius intead of Mac Auth request.  This is preventing me from...
  • 1 me too
  • 7 replies
  • Question
  • Answered
Photo of Brian Holmes
IDE 9.4 - how can I add an MDM enrolled device to an IDE group
I tried to add the Mac Address of an MDM Enrolled iphone to a Device Group so that it would follow a new policy I am writing.  To my surp...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of Tiburcio Jr Coronado
Extreme Management Center 8.1.1.41 Open Device Terminal with Radius
Is it possible to login to Device Terminal using Radius login in EMC 8.1.1.41? In Ridgeline you were able to telnet into switches using R...
  • 2 me toos
  • 1 reply
  • Question
  • Answered
Photo of Ilya Semenov
Unable to connect to XMC 8.1 with Java-concoles
Hello, team, I've done a clean install of XMC, PV and NAC  - everyting version 8.1 - under ESXi. XMC, PV, NAC and client computers are i...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Ilya Semenov
NAC appliance is red in console, but green in XMC
Hello, team, after reboot NAC is red in Console, but green in XMC. As result, nothing works. I've read: https://gtacknowledge.extreme...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Christian Gfeller
Extreme 220 Series: Multiple Supplicant 802.1x (PC and Phone) on the same port
Hello I have a computer and a phone on the same switch port with different vlans working (VOIP VLAN configured). Is it possible to auth...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Ilya Semenov
Connected wireless clients are not shown in NAC's End-Systems
Hello, team, I have Netsight (7.1.1.9), NAC (7.1.1.9) and V2110 (10.43) installation. Both NAC and V2110 were added to Netsight console ...
  • 1 me too
  • 7 replies
  • Question
  • Answered
Photo of Jeff Lanza
How does WiNG Captive Portal (RADIUS) authentication work with locally bridged (self) mode and external captive portal web pages?
I'm operating a WiNG wireless controller to manage remote APs. I'm attempting to setup external captive portal pages, and in order to hav...
  • 4 me toos
  • 14 replies
  • Question
  • Answered
Photo of Ilya Semenov
NAC captive portal shows endless "registration" after successful logon
Hello, team, I configure interation of V2110 and NAC Captive portal. User database is an Active Directory. When users joins SSID he us ...
  • 1 me too
  • 3 replies
  • Problem
  • Solved
Photo of Manuel Diaz
FreeRadius is not sending attributes to the Wireless Controller on the Access-Accept package
We have configured a FreeRadius to work along with an IdentiFi Wireless Controller, but even when it is authenticating correctly, the Fre...
  • 2 me toos
  • 1 reply
  • Problem
  • Not a Problem
Photo of Prabhu.M
Internal Radius(802.1x) Authentication in NAC Appliance?
Kindly help us to guide how to configure the Internal Radius(802.1x) Authentication in NAC Appliance.
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Prabhu.M
Internal Radius(802.1x) configuration guide in NAC Appliance?
Kindly share us if you have the internal radius configuration in NAC appliance. As we don't have any document to do the setup.
  • 1 me too
  • 1 reply
  • Question
  • Answered