18920 10bfk5w inline large

Security

Conversations

Recent Conversations
Conversations 1 - 15 of 345
Photo of Brian Holmes
4500 802.1x EAP behavior
We have a 4500 switch running SW:v5.11.1.101 When we connect an 802.1x client, the switch is sending a new authentication request every ...
  • 1 me too
  • 0 replies
  • Problem
Photo of Leonardo Peixoto
XMC 8.1 Policy Manager shows A2-Series as UNSUPPORTED
Greetings Guys, Here we go again with legacy gear... But they are dying hard, because *almost* nothing can break it, they got forgotten ...
  • 1 me too
  • 4 replies
  • Problem
Photo of SH
Using TLS Certificate fields for authentication mapping
Hello, can I use TLS certificate fields like "TLS-Cert-Issuer" or "TLS-Cert-Common-Name" (or other fields mentioned here: https://gtackn...
  • 2 me toos
  • 4 replies
  • Question
  • Answered
Photo of Christoph
XOS eapol path-through
Is it possible to configure EAPoL pass-through on XOS? I would need it on Summit X430 switches with firmware version 16.
  • 2 me toos
  • 1 reply
  • Question
  • Answered
Photo of Brian Holmes
IDE 9.4 is interpreting Mac Auth from a Cisco Wireless Lan Controller as a Radius intead of Mac Auth request
IDE 9.4 is interpreting Mac Auth from a Cisco Wireless Lan Controller as a Radius intead of Mac Auth request.  This is preventing me from...
  • 1 me too
  • 7 replies
  • Question
  • Answered
Photo of Brian Holmes
IDE 9.4 - how can I add an MDM enrolled device to an IDE group
I tried to add the Mac Address of an MDM Enrolled iphone to a Device Group so that it would follow a new policy I am writing.  To my surp...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of Emile
Source port + destination address policy
Hello, In NetSight Policy Manager, I would like to create a set of rules to permit a traffic based on a source IP + source port AND a des...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Martin Shadbolt
Recommended SNMP and Syslog configuration for Security Monitoring
We maintain a fleet of Extreme switches (predominantly Summit series). I'm looking for a best practice guide or similar for the configura...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of Drew C.
PLEASE READ || Login System Changes on The Hub
Hello community members,Beginning Thursday, June 14, the login system here on The Hub will require you to use your Extreme Portal accoun...
  • 1 me too
  • 1 reply
  • Announcement
Photo of Ilya Semenov
Unable to connect to XMC 8.1 with Java-concoles
Hello, team, I've done a clean install of XMC, PV and NAC  - everyting version 8.1 - under ESXi. XMC, PV, NAC and client computers are i...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Ilya Semenov
NAC appliance is red in console, but green in XMC
Hello, team, after reboot NAC is red in Console, but green in XMC. As result, nothing works. I've read: https://gtacknowledge.extreme...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Ilya Semenov
Purview upgrade issues: 7.1.1.4 >> 8.1.2.59
Hello, team, I've tried to update Purview from 7.1.1.4 to 8.1.2.59 and failed. Systems said: root@Purview.spbgasu.ru:~$ ./purview_appl...
  • 1 me too
  • 4 replies
  • Problem
  • Solved
Photo of Martin Flammia
Captive Portal Guest Registration add an additional radio button.
Hi, Have a WiFi Captive Portal solution using Guest Registration, and added the option to accept the AUP. The problem I have is that I ...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Christian Gfeller
Extreme 220 Series: Multiple Supplicant 802.1x (PC and Phone) on the same port
Hello I have a computer and a phone on the same switch port with different vlans working (VOIP VLAN configured). Is it possible to auth...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Tamera Rousseau-Vesta
At Last...VISIO STENCILS!
All Visio stencil links have been moved to our main website:  http://www.extremenetworks.com/support/visio-stencils Please use the links ...
  • 9 me toos
  • 31 replies
  • Article