18920 1g8z1s6 inline large

Switching & Routing

Conversations

Recent Conversations
Conversations 16 - 30 of 2130
Photo of Danial Jalil
Can flow-redirect be used on layer 2 ? if yes, Syntax please
I want to redirect flows based on port numbers. Is there a way to achieve that?
  • 2 me toos
  • 2 replies
  • Problem
  • Not a Problem
Photo of M.Nees
VOSS "Default" command
What about the "default" command in VOSS ? I see this command at interfaces, MLT, etc. and at global command level. Here an example (V...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Soon Lin Ewe
Anyone with experience in ring topology configuration by Using the dual-ISW Switches.
Hi Team,I am looking for any experts that has done a dual ring configuration L2, with using the ISW switches. The customer is looking for...
  • 1 me too
  • 0 replies
  • Question
Photo of Uber Londoño
7100 Core Switching Capacity
I have a 7100 Switch and I need to know, how many packets in the network it support, how can I obtain a number, eg, 65000 packets per sec...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Roman Serbski
VDX6740-24 and base switch license
Hello, Does VDX6740-24 by default come with 2x40G ports license included in the base switch license or it has to be ordered separately? ...
  • 2 me toos
  • 3 replies
  • Question
  • Answered
Photo of Sharoz Khan
what are the VPN protocols supported by etreme Network switches with model ? and How we configure it on extreme switches ?

  • 1 me too
  • 6 replies
  • Question
  • Answered
Photo of Stephen Stormont
Is this QOS configuration really doing what we want it to?
Our VoIP phones send traffic with a DSCP value of 46.  The phones are connected to a Summit X440-G2 stack in a VLAN called "VoIP" that ha...
  • 3 me toos
  • 4 replies
  • Question
Photo of Yves Haslimann
Sending flow data from a switch direct to ExtremeAnalytics (without a flowcollector engine)
Hello everybody I would like to configure the Extreme Switches (x440-G2, with version 22.4) to sending sflow/netflow data direct to the ...
  • 2 me toos
  • 16 replies
  • Question
  • Answered
Photo of Bill Bixby
Core Routing VLAN
Best practices for layer 3 network design and routing traffic
  • 1 me too
  • 3 replies
  • Question
Photo of aloeffle
Where to download legacy firmware (EOS)?
Dear all. On and off I need specific legacy firmware versions for Enterasys devices running EOS. C-Series, B-Series, etc. Since we have ...
  • 4 me toos
  • 9 replies
  • Question
  • Answered
Photo of Will Irizarry
MLXe Rbridge vs VRID
I am working on configuring VRRP instances in a pair of MLXe routers. Can the Rbridge ID and the VRID be the same value?  I was told they...
  • 2 me toos
  • 1 reply
  • Question
Photo of M.Nees
VOSS Switch indication via LED flashing
i am looking for a command in VOSS that is the same like EXOS "enable led locator": enable led locator {timeout [seconds | none]} {patte...
  • 1 me too
  • 1 reply
  • Question
  • In Progress
Photo of Bruno
Lag X460G2 CCR1009
Hi, im having a issue while tring to bond 2 ports between a x460-g2 and a mikrotik ccr1009. My TX traffic get balanced but there is no wa...
  • 1 me too
  • 6 replies
  • Problem
  • Solved
Photo of Walt Witkowski
Comments welcomed on multicast configuration
Running two S4 cores, each with a VRRP instance to 25 individual closet switch stacks.  I am enabling IGMP on each network in each core t...
  • 1 me too
  • 0 replies
  • Question
Photo of Martin Flammia
VRRP best practices, preempt, tracking, fabric routing, accept-mode, host mobility
Hi There, Apologies for this question being a little long.... Just looking into the communities thoughts around some best practices aro...
  • 3 me toos
  • 5 replies
  • Question
  • Answered