18920 1g8z1s6 inline large

Switching & Routing

Conversations

Recent Conversations
Conversations 31 - 45 of 2191
Photo of sumeet
find ip address alloted to a particular mac address by switch extreme summit x460-24t
hi we have extreme networks summit x460-24t switch It is configured to allocate dhcp ip on vlan 101-400 of the type 172.16.<vlan>.<2-255>...
  • 1 me too
  • 7 replies
  • Question
  • Answered
Photo of paulcian
SLX MCT with RSTP
2-SLXs running R-Code with MCT and RSTP between them.  Both SLXs are set for Root Bridge Priority 0.  One of the SLXs is the Root of the ...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of sldier
Where can I find the firmware repertory in EXOS ?
Hello,Can you please tell me if we have access to see where are the firmware repertory in the switch after download it ?I've tried  the c...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Ben Kessell
Show IP address of specific port
I had a switch "dissapear" from our network but it is still plugged in to the appropriate port. In short, the switch on that port has an ...
  • 3 me toos
  • 5 replies
  • Question
  • Answered
Photo of Visconti
SHOW IP PORT
I do not view all ip connected to all of 48 ports of my switch (series B5 and seris X450) . I 'll accept to use "extreme management serv...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Visconti
how to enable data collection for one port of my switch (series B5)
can anyone say me how to enable data collection for one port of my switch (series B5) ?
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of gravyface
Summit: icmp-based bandwidth testing
A 3rd-party is running scheduled jobs to measure bandwidth/latency/jitter against various hops in the network (VLAN interface on core swi...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Brent Addis
Eaps 4 switch ring w/ MLAG
Hi,I have a bit of confusion around the configuration of the design on a network we have built.We have four sites, connected by 2 * 10 gi...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Belo Gayu
Map Between VLANs on an N-Series Router
I have an N-Series router, and I am trying to map between VLANs. Inside of the router, the network is on VLAN 2 while outside the network...
  • 1 me too
  • 0 replies
  • Question
Photo of Ilya Semenov
What means (2 LRM Capable) in 220 Series Description?
Hello, team,"220-Series 48 port 10/100/1000BASE-T, 4 10GbE unpopulated SFP+ ports (2 LRM Capable), 1 Fixed AC PSU, 1 RPS port, L2 S...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Visconti
How to set time in switch 450series
I would to "set time" of my switch 450 series ...in series B5 extreme I have success but not in 450 series
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Martin Flammia
Authentication Mode Optional - Older Code
Hi,In the process of configuring MAC based Netlogin on some older switches, the configuration will look something like the following:crea...
  • 2 me toos
  • 5 replies
  • Question
  • Answered
Photo of Martin Flammia
ELRP across multiple stacks
Hi, Have a scenario where we are using ELRP, which works great for disabling ports on the same stack but we have a stack in the same roo...
  • 1 me too
  • 6 replies
  • Question
  • Answered
Photo of Nathan Derichsweiler
AP7532 Mesh GE1 port configuration
I have a Mesh network set up with 2 AP7532. One is in the garage and I want to connect a PC to via ethernet. It is possible to configure ...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Ilya Semenov
220-switches stacking
Hello, everybody, There are several questions about 220's stacking: 1) Could I stack 24 and 48 ports models? 2) Is the 10GB-C01- SFPP ...
  • 2 me toos
  • 2 replies
  • Question
  • Answered