Conversations

Conversations 1 - 20 of 599
Photo of aloeffle
Where to download legacy firmware (EOS)?
Dear all. On and off I need specific legacy firmware versions for Enterasys devices running EOS. C-Series, B-Series, etc. Since we have ...
  • 3 me toos
  • 7 replies
  • Question
  • Answered
Photo of Mike Rodriguez
Show entire port configuration for a specific port
I would like to have the entire configuration for a specific port > output in the same way you can view the entire configuration for a vl...
  • 2 me toos
  • 8 replies
  • Question
Photo of John Brancato
x460-G2 40G Uplinks with Bidi Optics
hello all, Relatively new to the family of EXOS switches.  Can the 40G VIM module be used for uplinks or is this module only designated ...
  • 1 me too
  • 1 reply
  • Question
Photo of Andreas Prott
V400 Stacking with two X690 and 3rd party optic
does someone ever try to build a V400 Stack with two X690 and 3rd party optics? I use OEM QSFP28 Transceiver  - Extreme 10403 Kompatibel ...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Arjumand Qazi
Extreme NAC as intro
Hello, Looking for documentation or video which will enable a newbie like me. the resource should show from A to Z step by step informat...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Alexandr P
IdentiFi - single SSID - different Auth
Hello, all! Have an IdentiFi wireless with NAC. We can make different VLANs with single SSID. https://gtacknowledge.extremenetworks.com/...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of Ted
PIM multicast and RP topology – need advice
I have PIM SM running on a dual core 8810 environment with edge user switches connected.  The multicast source server used to terminate...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Alexandr P
Disassociate for specific MAC
Hello, All! Controller C35. Is it possible to configure RSS threshold for specific client's MAC address? Thank you!
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of Leonardo Peixoto
NAC 802.1X Authentication and "Transparent" registration
Hi Guys, I have a customer deploying NAC and they asked me for an "uncommon" feature... The customer is willing to authenticate users (...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Rahman Duran
AP3825I EOS?
Hi, Will AP3825I model End of Sale on June 2018? Regards, Rahman
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Alexandr P
Password generator
Hello, all! IdentiFi + NetSight + NAC. Is there possibility to automatically change passwords for SSID? For example, every week passwor...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of David Hernandez
Would like to know where I can find the configuration pdf file for the AP7632
AP7632
  • 1 me too
  • 7 replies
  • Question
  • Answered
Photo of James Red
Switch with 1gb and 10gb ports
Hi Community, I would like to know if there is a 24-port extreme switch with below port config: 12 ports electrical 1Gb 12 port SFP+ 10...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Christopher Ivins
What's the difference between SKU 10311 and 40GB-CO.5-QSFP
I see both devices listed on the X450 datasheet.  I am trying to figure out the difference and which one is the correct one for stacking ...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Alexandr P
diagnostics stack-port
Hello, all! Need some clarification. I have X460G2 with SS card. SummitStack card with 2 stack ports. BUT when I #run diagnostics stac...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
Packet capture EXOS 22.3.1.4
Hi, I am trying to do a capture on a switchport i have used different commands, but it looks like they only capture internal traffic. Th...
  • 2 me toos
  • 1 reply
  • Question
  • Answered
Photo of Alok Shukla
ACL for applying over VLAN
We have 4 VLAN over Core Switch (MLAG configured) VLAN 1: 10.3.1.0 VLAN 2: 10.3.2.0 VLAN 3: 10.3.3.0 VLAN 4: 10.3.4.0 we don't want VLAN...
  • 2 me toos
  • 3 replies
  • Question
  • Answered
Photo of M.Nees
WLAN (Identify / Wing) something similiar to LAN 802.1x quiet period ?
On 802.1x LAN port i can configure "dot1x quiet period" if i have trouble with rejected clients which try it on and on and on ... Beca...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
Unable to telnet to Slot on a Stack
Hi all, On my access layer switches, which are configured in stacking mode with versions 22.3.1.4 and 21.1.3.7, i am unable to telnet in...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Eduardo Mendizabal
TDR or similar cable test diagnostics
Hello everyone, I would like to know if the summit series has any TDR functionalities or similiar failure detection features on copper c...
  • 1 me too
  • 5 replies
  • Question
  • Answered