Conversations

Conversations 1 - 20 of 27
Photo of htw
Multicast problem with dynamically created vlans
Hi,following scenario:- two AccessSwitchstacks X450-G2 (22.4), each connected with an MLAG to a pair of Summit X620 Distributionswitches....
  • 1 me too
  • 2 replies
  • Question
Photo of htw
EXOS equivalent for EOS "show port advertise"?
Hi, with EOS I can use "show port advertise" to see the advertised speed of a network device which is connected to the switch, f.e.: SWIT...
  • 2 me toos
  • 2 replies
  • Question
Photo of htw
NetSight Wireless Clients Event Analyzer shows -1 as SNR
Hi, when I take a look at Netsight EMC 8.0.2 / Wireless / Clients / Client Events table, row: "Metrics" (it's the last one in the table),...
  • 2 me toos
  • 6 replies
  • Question
  • Doesn't Need an Answer
Photo of Ronald Dvorak
firmware download page too complicated
I'd like to upgrade my EMC but I don't plan to search for minutes on the download page for the right file. Example: I'm sorry but eithe...
  • 21 me toos
  • 17 replies
  • Problem
  • In Progress
Photo of htw
How to assign tagged VLAN and policy with NAC for user port?
Hi, we are using NAC to assign policies and a location-dependent VLAN-ID for untagged VLANs on our User ports (Summit x450-G2- and Entera...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Jarek Sobieszek
Summit X460-G2 and PurView it is possible ?
How integrate Summit X460-G2 with  PurView ?
  • 1 me too
  • 12 replies
  • Question
  • Answered
Photo of Anton Sax
Netsight v8 Upgrade - java gui not working
Hello, Yesterday I upgraded Netsight to version 8.0.2 from 7.1.2 Since then the java gui is not working. The App is loading and asks for...
  • 5 me toos
  • 15 replies
  • Question
  • Answered
Photo of htw
EMC Flexreport Device bandwitdh: shows only some kilobytes
Hi, when I look at  EMC 8.0.3 / Network / Devices / at one of our S-Series Switches, the flexreport for Device bandwidth shows a graph mo...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of htw
NMS-ADV with V2110 WiFi: Triangulation requirements
Hi, we use NMS-ADV which provides advanced wifi map features with V2110 V10.31.04 (large). I deployed three APs at the lab broadcasting...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of htw
EMC / ACE / AAE virtual Appliance scaling
Hi, 8.x release notes describe the amount of CPUs, Memory and Disk size which is needed for small, medium or large installation of Virtua...
  • htw, 1 year ago

  • 2 me toos
  • 0 replies
  • Question
  • Doesn't Need an Answer
Photo of htw
Cant find Access List Manager / Editor in EMC 8.0.2 JAVA Client
Hi, after installation of 8.0.2 I cant find Access List Manager and Editor functionality on the Legacy Java Client. Have they been removed?
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of htw
How to Upgrade to EMC v8 without internet access?
Hi, we are using virtual Management Center 7.1.2 connected to an internal network. For Update Checks we are using a webproxy which is con...
  • 2 me toos
  • 4 replies
  • Question
  • Answered
Photo of htw
Use cases for Bluetooth BTLE on AP391x?
Hi, AP3912 and AP3916 have integrated BTLE/802.15.4 radio. What can it be used for?
  • 3 me toos
  • 8 replies
  • Question
  • Answered
Photo of Andre Brits Kannemeyer
Identify High usage WiFi User
Hi Comminuty looking at the image below: We do not have purview deployed, what is a quick report to see the client/AP responsible ...
  • 4 me toos
  • 2 replies
  • Question
  • Doesn't Need an Answer
Photo of htw
Show used topology in EWC client report?
Hi, how can I see at EWC Client Report which topology (group) /VLAN a wireless client uses? I currently use EWC 10.21.01.0065 and client...
  • 2 me toos
  • 9 replies
  • Question
  • Answered
Photo of htw
"default WLAN assignments to foreign APs" not working
Hi, I have two V2110 controller paired in HA-mode (10.01.04.11). With wireless manager I roll out VNS, wireless service & Co to both cont...
  • 1 me too
  • 3 replies
  • Problem
  • Solved
Photo of htw
Port Protected Mode on 7100-Series?
Hi, on SecureStack switches, the Port Protected Mode was available. It prevented The Protected Port feature is used to prevent ports fro...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of htw
S-Series: number of OSPF processes for 24 VRFs
Hi, S-Series S180, S140  support up to 256 VRF. We would need about 24 of them and want to use OSPF. S-Series CLI guide states: "Multiple...
  • 1 me too
  • 6 replies
  • Question
  • Answered
Photo of M.Nees
Missing WLAN Channels in 5 Ghz (Germany/Europe)
i wonder why i have not possible WLAN Channels listed in 5 GHz: Regulatory Domain: European Union (& Rest of World) AP 3705i...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of htw
purview receives netflow and mirrorN, but apps are not identified
Hi, I installed a virtual vmware purview/analytics AAE in deployment mode 2 (Interface mirrored), with eth0 for netflow and management an...
  • 1 me too
  • 19 replies
  • Problem
  • Solved