Conversations

Conversations 1 - 20 of 23
Photo of Johan Hendrikx
AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch
I have more than 50 AP 3805i connected at X440G2-24p-10G4 and X440G2-48p-10G4 switches. One AP connect with 100 mb instead of 1...
  • 2 me toos
  • 5 replies
  • Problem
  • Solved
Photo of Scott Van Artsdalen
How to keep APs registered to the primary controller
We have a couple of C2510's running as availability peers.  Periodically throughout the day the APs will "roam" over to the availability ...
  • 1 me too
  • 6 replies
  • Question
  • Answered
Photo of Alexandr P
IdentiFi - single SSID - different Auth
Hello, all! Have an IdentiFi wireless with NAC. We can make different VLANs with single SSID. https://gtacknowledge.extremenetworks.com/...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of Rey Juan Carlos University [communications]
We would like to use UNII3 channels on our Wifi infrastructure.
We would like to use UNII3 channels (5ghz) on our Wifi infrastructure. Is that possible? Our scenario: Controllers C5210, APs 3965e + sem...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Rey Juan Carlos University [communications]
How to manage firmware upgrade scheduled jobs in EMC?
I want to know if the scheduled firmware upgrades can be managed somehow. It would be practical to cancel, reschedule or simply get a lis...
  • 2 me toos
  • 3 replies
  • Question
  • Answered
Photo of Ronald Dvorak
max. sites per controller
I wasn't able to find the answer, is there a matrix, I'm especial interested to know the value for the C35 controller. Thanks, Ron
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Rey Juan Carlos University [communications]
Summit x670-G2 Stacking Methods
Hi,  We are wondering about the logic behind two stacking methods between x670-G2 switches: v80 and v160. One difference is obvious, v16...
  • Rey Juan Carlos University [communications], 9 months ago

  • Last reply: Bin, 9 months ago
  • 2 me toos
  • 3 replies
  • Question
  • Answered
Photo of Rod Robertson
Netsight 6.3.1 grouping alarms to produce single email notification.
We have a request , so that we can Identify a major failure for our AP's ( per location ) . We already have alarms set per individual AP....
  • 3 me toos
  • 0 replies
  • Idea
  • Under Consideration
Photo of Andre Brits Kannemeyer
AP visibility and control in a HA Pair
Hi Community So I as part of a clients solution, we have deployed a High Available pair of C5210 controllers. One controller is the prim...
  • 2 me toos
  • 5 replies
  • Problem
  • Solved
Photo of Doug Hyde
As an Administrator of ExtremeWireless what reporting/logs are the most helpful for post-installation monitoring?
As an Administrator of ExtremeWireless what reporting/logs are the most helpful for post-installation monitoring?  Do you use NetSight o...
  • 2 me toos
  • 3 replies
  • Question
  • Answered
Photo of Rey Juan Carlos University [communications]
Netsight. We need to configure traps and syslog in all our devices to see problems and create alarms with AlarmManager.Some Help?
We need to activate traps and syslog in all our devices, but we don't know how. something like fan status, power status, etc...
  • 2 me toos
  • 9 replies
  • Question
  • Answered
Photo of Rey Juan Carlos University [communications]
4 channel plan on 2.4 Ghz.
4 channels plan on 2.4Ghz doesn't work on APs 3825i+3805i with Controllers C5210. We would like to try a 4 channels plan on 2.4 Ghz. We c...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of M.Nees
IdentiFi: V10.31 Feature: Independent CaptivePortal @ AP Use Case ?
In some projects i need Guest portal directly running on AP. More easier then using the portal running at EWC and do a vlan/subnet change...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of Yves Haslimann
access point time zone
Hello, I have several access points managed by the IdentiFI Controller. Is there a way to configre on the AP's a NTP and a timezone? I...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Rod Robertson
DFS channels unavailble due to RADAR interferance, best way to use NON DFS channels
We have an extreme wireless configuration (5210 controller and  ap 3805 ) and had been using the additional DFS channels. These Ap's are ...
  • 2 me toos
  • 6 replies
  • Question
  • Answered
Photo of Ron Oley
Wireless clients sporadically getting Limited Connectivity, APs dropping packets
We have a pair of V2110 wireless controllers and around 400 3825i access points.  Controller firmware is  09.21.06.0002.  AP firmware is ...
  • 9 me toos
  • 55 replies
  • Problem
  • Solved
Photo of Sai Prasad Rao Rapolu
CLI Reference Guide - IdentiFi Wireless Controller and APs
Hi All Need CLI Reference Guide ( Identifi Wireless ) for version 9.21.x.x Can anyone share pdf if available.
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of FES
Problem with Matrix E1 and Cisco 3905 using ciscocdp
Hi!!! I have a problem with ciscocdp on matrix E1. I have a C5 and all is working fine. The same configuration has been configured on E1 ...
  • 2 me toos
  • 7 replies
  • Problem
  • Solved
Photo of Rey Juan Carlos University [communications]
How can we activate downgrade firmware with Enterasys Inventory Manager?
How can we activate downgrade firmware with Enterasys Inventory Manager? We can't downgrade firmware on our switchs with Inventory Manage...
  • 1 me too
  • 4 replies
  • Question
Photo of Rey Juan Carlos University [communications]
How to see a stack devices on Netsight Console.
We have a problem with devices Enterasys C5 on Stack. We would like to see every device C5 on Stack with Inventory Manager. Now Inventory...
  • 2 me toos
  • 6 replies
  • Question
  • Answered