Conversations

Conversations 1 - 20 of 80
Photo of Laura
lldp settings for AP on contoller c5210
I noticed some of my 3605 and 3610 APs have an LLDP setting enabled and some do not. What does this setting do? Do i need it enabled?
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Hasan Güngör
how to connect to extreme identify wireless c35 by using console port?
ı don't connect this device with admin ports by using console cable 
  • 1 me too
  • 5 replies
  • Problem
  • Solved
Photo of Rey Juan Carlos University [communications]
We would like to use UNII3 channels on our Wifi infrastructure.
We would like to use UNII3 channels (5ghz) on our Wifi infrastructure. Is that possible? Our scenario: Controllers C5210, APs 3965e + sem...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Humza
DHCP option 78 with multiple controllers?
Howdy, I am currently testing two C35 controllers - as part of our testing we were able to get some access points provisioned fine on a ...
  • 1 me too
  • 8 replies
  • Problem
  • Not a Problem
Photo of Andre Brits Kannemeyer
XMC Device Type Visibility
Hi Community. With the Version 10 of the Identify wireless firmware, it identifies device types, without the need for NAC. Can XMC repor...
  • 2 me toos
  • 1 reply
  • Question
  • Answered
Photo of Rich
Wireless AP manual firmware update with internal memory format?
I am aware of how to manually upgrade AP's via SSH and have done so many times.  A customer has raised a concern that any manually create...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of sabou Doumbia
how to active access point ws-ap3805i connect to wireless controller c35
how to active access point ws-ap3805i connect to wireless controller c35
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Mikaeil Beigpour
active status access point
please help me to active access point status
  • 2 me toos
  • 5 replies
  • Question
  • Answered
Photo of M.Nees
EWC ignore clients Deauth frames
At several customers EWC installations i am wondering that some clients are reported as active (Reports - All Active clients) although i ...
  • 3 me toos
  • 4 replies
  • Question
  • Answered
Photo of MN
AP Registration Process
Hello Community, can anyone provide me a successfull AP Registration Process over the CLI on an AP? If possible, also I need the steps ...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Siva Raj
Controller not discovered Newly configured AP
V2110 controller can't discover or add New AP 3825i. Already 120 AP's are  added in controller, If i try to add new AP it is not adding b...
  • 1 me too
  • 3 replies
  • Problem
  • Not a Problem
Photo of Alexandr P
C35 evaluate license
Hello, all! https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Request-IdentiFi-Wireless-Eval-lice... f the evaluation per...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Jordi Soler
Wireless License Violation
Hi, I have a customer that just bought an AP, and has gone over the license limit. They have bought the new license, but just in case al...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Valter Veiga
Apple MacBook Sierra Wireless WIFI 5GHZ
MacBook running HighSierra in wireless 5Ghz very instable in access-points 3825, 3805, 3912 with controller C25 running v10.31.04 ou v10....
  • 2 me toos
  • 32 replies
  • Problem
  • Not a Problem
Photo of Dusan K.
AP3805i-ROW won't register with V2110 anymore (same VLAN)
AP's in the same subnet as the physical topology (esa0, PHY, AP Registration checked). APs were already registered with EWC (initially de...
  • 2 me toos
  • 11 replies
  • Problem
  • Solved
Photo of Ronald Dvorak
do I need mobility with bridge@ap
Hi, do I need mobility if my 4 controllers in the domain only have bridge@AP topologies ?! I can't remeber whether that is required. Th...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Martin Flammia
Wireless Client Disconnects After Captive Portal Registration
Hi, This is probably a checkbox somewhere I can't find, but the symptom is that whenever a wireless client finishes the captive portal r...
  • 1 me too
  • 7 replies
  • Question
  • Answered
Photo of Peter Kulmbrein
No station connects to my different SSIDs anymore
No Client is able to connect to my different SSIDs anymore. Configuration is 2 V2110 on 10.31.05 in a FFO config - both up and running sh...
  • 2 me toos
  • 2 replies
  • Problem
  • Solved
Photo of Darrin Tingey
integrate wireless controller with NAC
We have a c35 controller and netsight I am just trying right now to make a simple connection to the nac through a vns wlan service.  I ha...
  • 2 me toos
  • 12 replies
  • Question
  • Answered
Photo of Yakup Erdol
Can not add Extreme Wireless Controller to Netsight
Hi all, We have installed Netsight with version 7.1.3.25 and EWC with version 10.21.04.0005. Netsight can discover switches and NAC appl...
  • 2 me toos
  • 10 replies
  • Problem
  • Solved