Conversations

Conversations 61 - 80 of 93
Photo of Laura
Adding new APs, and they are showing up as "Inactive"
I'm installing new APs, and I can approve the APs, but they are showing up as "Inactive". They have a 00.00.00.00 addresses. I have tried...
  • 1 me too
  • 11 replies
  • Problem
  • Solved
Photo of Laura
C5210 Log message
This is a major log message in my C5210 Wireless Controller. Has anyone seen this log message before in their controller? And what does i...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Andre Brits Kannemeyer
Firmware Version 10.21
Hi all I have been following the launch of the new 3912 and 3916 AP's. I am very excited about the new models. I see the new AP's is la...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Eisi
Controller snmp community change ap alarm
I have added a rw snmp community-string to Wireless Controller (C4110-2,  System Version 09.21.07.0007) in Netsigth (6.3.0.182). The comm...
  • 1 me too
  • 5 replies
  • Problem
  • Solved
Photo of Carlo Alviar
New AP cant be detected by the controller
Today we tried to configure new APs for our remote sites. But when we connect new APs in the working network the controller cant detect t...
  • 1 me too
  • 5 replies
  • Problem
  • Solved
Photo of Marlon
identifi client connection issues
Hi, we cross to this gtac article https://gtacknowledge.extremenetworks.com/articles/Solution/Client-connection-issues-with-firmware-9.....
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Steve Ballantyne
Troubleshooting a failed / disconnecting AP
I have a site with an AP that has disconnected several times now, seemingly randomly (it's happened after hours, with zero client connect...
  • 1 me too
  • 3 replies
  • Problem
  • Solved
Photo of ITS Tech
Changes to VNS settings require devices to "Forget This Network" before they will connect to same network, same credentials - C5210
Seems that any changes to topology (i.e. to multicast filters) or associated VLAN tag cause clients to not be able to connect.  Turning o...
  • 1 me too
  • 3 replies
  • Problem
  • Solved
Photo of arabinda mohanty
ap automatically downgrading
Hi We are trying to upgrade 3805i Access Point from 9.15.x to 9.21.x , AP GETS UPGRADED to 9.21.x BUT Immediately degrades  to 9.15.x a...
  • 1 me too
  • 11 replies
  • Question
  • Answered
Photo of Sai Prasad Rao Rapolu
Upgradation of Identifi Wireless from 9.x to 10.x
Hi We are planning to upgrade our C5210 controllers and 3805i Access Points from 9.21.x to 10.x From release notes it says upgrading f...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Laura
A Wireless AP has attempted to connect with outdated key information.
What does this mean? A Wireless AP has attempted to connect with outdated key information.
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Laura
How do I telnet or ssh into a 3605/3610 AP?
Is there a way to telnet into the 3605/3610 APs?
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Dewald Botha
DHCP offer and discover on EWC V2110 - issue
Hi all, Odd thing, a client's V2110 has a large amount of DHCPDiscover and DHCPOffer requests from it's interface. I am aware of thi...
  • 1 me too
  • 6 replies
  • Problem
  • Solved
Photo of htw
Ap with 5 GHz (Clients) plus flexible 2,4/5Ghz Interface for RADAR
Hi, some weeks ago I saw a presentation for an access point in the market with a 5 GHz Interface and a second Interface were you can conf...
  • 2 me toos
  • 5 replies
  • Idea
Photo of Mikaeil Beigpour
problem to connect wireless controller c5210 to access point in different vlan
 i have problem to connect wireless controller c5210 to access point in different vlan. how to configure my controler to solve yhis probl...
  • 1 me too
  • 6 replies
  • Problem
  • Not a Problem
Photo of Mikaeil Beigpour
enable radio1 and radio2 at access point connect to c5210 controller but i cannot see ssid at my mobile
enable radio1 and radio2 at access point connect to c5210 controller but i cannot see ssid at my mobile
  • 1 me too
  • 10 replies
  • Problem
  • Solved
Photo of Verus
Some clients disconnect after upgrade to new firmware on AP's
Hi, We have two C25 controllers and I upgraded both from firmware 10.01.02.0038-1 to firmware 10.01.05.0008-1. The upgrade went just fine...
  • 2 me toos
  • 6 replies
  • Problem
  • Solved
Photo of JP Pieterse
Disassociate AP's from a bricked controller that is no longer available.
Controller not booting, AP's are keeping connection to a non existent controller alive. V2110 controller is no longer available. AP's nee...
  • 1 me too
  • 5 replies
  • Problem
  • Solved
Photo of Christoph Bloos
How to downgrade an AP 3805 image from 10.01.04.1003 to 09.21.07.0007
I have to attach 3805 APs to a V2110 Controller running version 09.21.07.0007 (need v9 as I have still to support 2600 APs). The config ...
  • 1 me too
  • 7 replies
  • Problem
  • Solved
Photo of Alex
AP 3825 and MLAG Topology
Hi everyone! Is it possible to perform an MLAG connection between two Summit Switches and 3825i APs? Our intention is to provide POE an...
  • 1 me too
  • 6 replies
  • Question
  • Answered